20 Most Recent Toshiba REGZA 42RV530U 42 in. LCD HDTV - Page 3 Questions & Answers

Click here to download the user's guide and check page # 5 for instructions on how to remove the pedestal stand.

Hi,
Please check tv remote for Zoom/ Aspect Ratio button, press it to change picture size as compare to screen.
Hope this will help.
Thanks.

Try contacting this place:
www.interliquidparts.com

You need to get the exact model and version of this screen as printed on the LCD panel sticker since you will have to transfer the T-CON and the backlights inverter boards to the new panel.
Notes: TV with the same model can have differnce LCD panel installed.

Basic troubleshooting guide here: http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/ Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Parts: www.shopjimmy.com Parts: www.interliquidparts.com Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Either your screen went, the bulb went or the bulb's inverter went. Bulb replacement in LCD screens, especially this large, is a very sensative procedure and not recommended without years of skills. Replacement of the inverter board is easier adn do it your self would cost betwen 60 to 150 USD. If it is the bulb or the screen, it will be more cost efficient to replace the unit. screens for this would cost 300+ USD

This tv is a LCD tv?Yes.No projection lamp on a LCD tv.Blinking LED any lights,LED light have power indication word on it?Yes,that power supply board it is dead and the causes.

try resting your tv. power off it press and hold av select botton and then power on your tv wait few minutes and it will rest your tv.... if not used the same wy holding menu botton instead.

If there was a popping noise of any kind when the tv screen went black there's a high possibility that one of the fuses in the tv popped and there is no power to the tv. It could also just be the outlet itself and try plugging the tv to different working outlets.

It sounds like damage to the screen. But it may be something wrong with the cord connecting to the computer. Unscrew the monitor cable and verify the pins are not bent. Also do the same for the other end of the cord connecting to the screen. Then put the cord back on both ends and make sure they are connected tight. Also you could try plugging it in to another computer or laptop to verify it is not an issue with your computer. Hope this helps.

The tv board call the T-CON decoders board is dying,that why this problems are appearing.This T-CON decoders board it sit right on the middle bottom of the LCD screen panel.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish T-CON decoders board for the replacement.

Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

Hi


Thanks for using FixYa. Hope you already know that this cannot be corrected through the MENU options. To resolve this issue you?ll have to open the back of the unit and check the inverter board which is the power supply source for the backlights. The issue can be a bad inverter board and/or the inverter board is not getting 20vdc from the power supply maybe due to the connector that has gone bad/loose.All this is only recommended to be done by someone who has electrical expertise and knows about the internal circuitry of the unit. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

sounds like bad power supply.

Hi,
Remove Four Screws as mentioned in below image and lift up tv to remove stand. Or face down tv on some clean flat table/ surface and remove marked four screws and pull out stand.
Hope this info will help you.
Thanks.

Hi,

You can download and print the manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

Manufacturer Toshiba Part Number 75010935 Description BASE BASE ASSY, BASE