20 Most Recent Sansui 32" TV - Page 2 Questions & Answers

Can I have a chance?

Sansui 32" TV | Answered on Oct 08, 2012

Download the user manual to your TV. It will have all details.

Sansui 32" TV | Answered on Jun 05, 2012

Visit this site for more details. Type in the site name "Electro-help" either Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as service help to electronic home entertainement equipments.

Pull up older posts. You can get all details.

Some ads with posts too might help you.

Sansui 32" TV | Answered on May 29, 2012

All equipment that operates on 110-120 volts ac will work perfectly fine on either 50 or 60hz---I have been in several places in the world from just above China to Moscow and in Canada--take the same gear with me and no problem--

Some multi-format sets that will work with different transmission systems work fine as long as the line voltage is correct.

Sansui 32" TV | Answered on May 28, 2012

SAP is secondary audio program---It can be turned off or on in a possible two places.

On the set in the audio menu (most original remotes have a SAP or MTS button for this but in the set menu it can also be adjusted on or off.

If you are using a cable or Sat box or even a receiver the box will have the SAME feature built into it--yes Sap can come from a cable box or sat or receiver.

Sansui 32" TV | Answered on May 26, 2012

Have you considered since you pay for Dish Network calling them?

Sansui 32" TV | Answered on Apr 20, 2012

Your problem post is very difficult to understand. What is the problem with this TV. Give me some more details please.

Sansui 32" TV | Answered on Apr 08, 2012

Check its vertical output section circuit. repalce all the elelctrolytic capacitors [5 or 6 of them] at the same time.

Sansui 32" TV | Answered on Apr 02, 2012

Provide more details about the fault please.

Sansui 32" TV | Answered on Mar 25, 2012

What do you mean by this double screen? Please send more details to the fault.

Sansui 32" TV | Answered on Mar 25, 2012

Get into

Sansui 32" TV | Answered on Mar 25, 2012

This may not work but i had a similar problem. My 32inch sansui LCD TV would switch off after about 10-20 minutes. I had to unplug it to get it going again. So i decided to open it as the warranty was long gone anyway. Very easy to open the back. I checked to see if anything was "swollen" as some sights suggested, but found nothing burnt , blown or swollen. Then i thought about heat? So i left in on without putting the metal backing plate back. It worked! when i put the plate back.....20 minutes and it shut down. So i just left the metal backing plate off! And no its not dangerous as the sansui has a protective plastic backing, that covers the metal one, that is better ventilated and protects the bits and pieces. Its been a week now and its fine.

Sansui 32" TV | Answered on Mar 06, 2012

Three digit universal remote code for sansui TV are:
135/ 136
Four digit codes are:
0135 0310
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Sansui 32" TV | Answered on Feb 29, 2012

select hdmi in your audio settings

Sansui 32" TV | Answered on Oct 15, 2011

How to increase volume

Sansui 32" TV | Answered on Sep 27, 2011

Sure the power supply si working and the processor seems struck up to trigger the power but is not responding to the remote. So it is important that the main processor is checked to fulfill the working. Check for the +5 rail voltage, check for the input /output data, check the remote feed of data and the crystal oscillator.
It is possible that there is a failure around the processor or the memory.

Sansui 32" TV | Answered on Sep 03, 2011

Did power signal lights appear?If there's no power signal lights,check the fuse,located at the power supply.If the fuse is good,maybe the power supply is dead.There's a leak capacitor in the power supply.Try to replace all the leak capacitor..The leak capacitor can identify through visual checking when you didn't know how to use tester.The leak capacitor is rounded top shape and have moise at the top,compare to flated shape of good capacitor.Thanks,hope will it help you..

Sansui 32" TV | Answered on Aug 26, 2011

Not finding what you are looking for?
Sansui 32" TV Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers


Level 3 Expert

13434 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sansui Televison & Video

  • Sansui Televison & Video

Most Popular Question

very low volume

  • Televison & Video