Top 20 Dynex DX-LCD19-09 19 in. LCD TV Questions & Answers


Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Dynex... | 62 views | 0 helpful votes


plug the main unit in the tv

Dynex... | 102 views | 0 helpful votes


0281,0288. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Dynex... | 91 views | 0 helpful votes


If the set is running in some type of component mode or digital component mode, there is no adjustment for color or tint.

Dynex... | 189 views | 1 helpful votes


Just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This must make the TV to a hard reset. If no other problems to the set's internal circuit boards, it should work properly. If it does not help you, make sure that the main board to this TV is faulty. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/

Dynex... | 34 views | 0 helpful votes


Main board fault. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/

Dynex... | 182 views | 0 helpful votes


have you tried the screen control board on the back of the screen. were and how did it get wet??

Dynex... | 193 views | 0 helpful votes


How is your TV setup--do you have a cable box, satellite, or basic cable? I would recommend going into the settings and running a channel search.

Press Menu. The on-screen display menu options with Setup highlighted.
Press RIGHT arrow to enter the sub-menu, then press DOWN or UP to highlight AUTO CH SEARCH.
Press ENTER or RIGHT arrow to start the search.

Dynex... | 90 views | 0 helpful votes


Increase the volume. Make sure that the sound is not muted. Make sure that the correct audio mode is selected. You can also try to power cycle the TV by turning the TV off and unplugging it for a minute, then plug it back in and restore system settings back to default. If the problem still persists, I would recommend bringing it back to the store to pursue repairs.

Dynex... | 69 views | 0 helpful votes


Adjust the contrast, color, and brightness settings. Make sure the video cables are securely connected. Make sure the correct video mode is selected.

Make sure the incoming signal is compatible. Make sure the antenna is connected correctly.

Check the closed caption settings. Some text modes can block the screen.

Dynex... | 68 views | 0 helpful votes


check the ribbon cable that connects the screen to the mainboard may have a loose connection

Dynex... | 114 views | 0 helpful votes


If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.

Dynex... | 490 views | 0 helpful votes


If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing. Also ensure that the system telecast is supported by your TV.

Dynex... | 284 views | 0 helpful votes


Most of the time its not your TV its the TV stations signal. Unless you live like in a nursing home were there are a gang of cable boxes and there is an adjustment on the box it self. We have them in our faucilty.

Dynex... | 176 views | 0 helpful votes


Check and replace its main system memory IC.

Dynex... | 85 views | 0 helpful votes


If a 19 inch it may not be worth fixing but should be replaced--answer is if a dark picture--display is driven by a inverter of some type---it may be cause,
the light source is usually a back light of some type==it may be the cause.. In any case the cost of having a set this size repaired just makes no sense.

Dynex... | 86 views | 0 helpful votes


Hello
Your Dynex TVs electronic tuner has the fault. Replace it. It will look like a small steel box, to ehich antenna cable gets connected.

Dynex... | 91 views | 0 helpful votes


The back where The plugs go in is proble over used

Dynex... | 187 views | 0 helpful votes


No response to power switch and no picture but have power to the tv.The main tv Tuner signal board it is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a whole new refurbish main tv Tuner Signal board for the replacement.

Dynex... | 721 views | 1 helpful votes


Hello
Will you please give me a brief description about how your Dynex is connected to security camera device? It will help me a lot to troubleshoot. OK.

Dynex... | 62 views | 1 helpful votes

Not finding what you are looking for?
Dynex DX-LCD19-09 19 in. LCD TV Logo

96 questions posted

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dynex Televison & Video

  • Dynex Televison & Video

Most Popular Question

19 in not possible adjust color tint

  • Televison & Video
Loading...