20 Most Recent Sanyo 42 in. LCD TV - Page 5 Questions & Answers

Time for a new Sony Bravia!

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given.

Main system control IC should be checked. Contact any service technician.

Look in the manual

The control voltage to backlight inverter board, from the main digital board cuts OFF, after the booting is over. In most cases, a firmware update might help you. Contact the authorized service center for Sanyo. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up older posts. Check the site in 'Mosaic' view. It will make search easy.

Hi , You need a converter to go from Optic to HDMI connector.

THK

Hi, You need a code to match with your TV remote. The codes for the Ge universal remote for Sanyo are 0049 0097 0110 0004 0268 0012 0108 0180. You will have to try each code seperately untill you get one that works. Good luck.

Remove the controller away from the tv and try the manual buttons on the tv to see if you are now able to control the volume. If you are able to control the tv manually then you definitely have a bad remote controller. I believe that you have a bad remote controller.

try turning volume all the way up and then all the way down a few times. Hold your ears :)

fues cot