20 Most Recent eMachines eMD620-5133 Notebook - Page 7 Questions & Answers

is far i know and i check your model does not have a web cam please check you also on the display there is no web cam in the product image so i think you will have to buy one.

You will have to backup all data you want to keep, (on a usb stick or external harddisk) and then insert the WIndows disk.
Then restart the PC, and press [enter] when the computer asks whether you want to boot from disk. Follow the setup, and WIndows should be installed just fine!

If you have any questions, please ask them.

This will need to be recovered you need to find your orginal disk and format the hard drive and start over unless your willing to purchase a $89 program that is called spinright www.grc.com this will fix the errors and recover what is lost.


thanks and please if this is very helpful rate it, Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

agatha christe death on the nile i need the unlocking coeds

what kind of windows? go to www.mininova.org/ and search windows! download and burn to a disk and you have a free windows cd. Your welcome.

Try a different antivirus, like AVG or Avira, and they are free. A good place to download programs like this is www.downloads.com.
If u know what trojan is it, there might be a specific remover for it, do u know which one is it?

go control panel.check mouse option and correct it, then work.

when you installed the driver for the usb did you select your usb device model ? some drivers are written for usb devices AND for wireless cards (=pcmcia) and at the begining of the instalation they ask: please tell me do you have usb or pcmcia ? or they might ask you (for example) to select the right model.
now if you have "usb" but you selected "wireless card" then at the end it will try to locate a wireless card.

if this is not the case then probably your usb is not working ok - you should try it on another laptop (or pc) and then have it changed at the shop you bought it...


the driver does not recognize the device because

I'll let you in on a little secret....hibernating is one of the biggest problems computers have and registry errors. If I could you some advice, it would be to go to the control panel > power options > go to the hibernate tab and un-check the enable hibernation box. Save the disk space allocated for it and save your system registry. If you want, just go to advanced power settings and set the computer to sleep after a certain amount of time, then just touch the touch-pad and the computer will come right back up.

yes.
For that open back cover of laptop. .
Then pull cmos cell from motherbord for 10 minutes so all settings goes to defaults.
Then it not ask for password.
let me know if you need more assistanse.
Thanks.

you need to run the system discs back through your laptop then all will be fine

ok... u have to get a disc or a driver to install it... if u have vista it might auto install it, but otherwise u have to get a driver

trust this like help you.

http://www.drivers-detectives.com/drivers/emachines/emachines-d-series/emachines-d620/

To check if the external video port on the laptop by connecting an external monitor to the laptop and see if it works. If it does work then the video port is OK and the only thing I can think of is :-
What is the highest resolution that the projector can display?
Is the video resolution on the laptop set higher than the projector's maximum resolution, if so reduce the screen resolution on the laptop.

14.1 in. WXGA TFT Active Matrix

(Taken from this web page)



Please take a sec to click the "Helpful" rating!

the code to what?

Go to Ebay, (Computers and Networking>PC Components>For Laptops and Notebooks>Screens,LCD Panels>Emachines D620)

Or here is a website I found,
http://www.screentekinc.com/eMachines_D620-5777--14.1-inch--1280x800-wxga-laptop-lcd-screen.shtml

Here is information on removing the old LCD screen,
http://www.sparepartswarehouse.com/LCD-Removal/laptop-lcd-screens-repair-removal-instructions.asp

Another one,
http://www.screentekinc.com/lcd-removal-instructions.shtml

Link to your users guide:
http://support.gateway.com/emachines/Mobile/2008/eMachines/eMD620/emd620ul.shtml