20 Most Recent
Mackie ProFX 8 8-Channel Desktop Sound Reinforcement Mixer - Page 4 Questions & Answers
My Pure Sonus 1Xt will not work
I thought my Pure Sonus 1XT was knackered as it would only show a blank blue screen and not respond to the buttons.
But by trial and error I found that if I disconnected it from the mains power supply for TWO WEEKS (one week was not enough) it would restart correctly, and would stay ok so long as I did not disconnect from the supply, and so I used only the standby button to switch off. If I did disconnect, it meant another two week wait.
No idea why this works. Mine did have a faulty power supply at one time (genuine Pure) which left 15v on the supply, rather than the 9v that it should be.
Worth a try before you take it for recycling.
Beresford.
Hyundai getz radio security code
When you disconnect your battery and then reconnect it
again, it disables the radio. This is an anti-theft protection for your car
radio.
The enable your radio the activation code is in your vehicle owner's manual. If
you do not have this code you need to go to your Hyundai service
centre and get them to enter this code for you.
How do i download music to a mp3 player
Depends what MP3 player ....
Usually you hook it up to a computer by USB cable and copy the music files onto it into the proper folder.
Make sure you put files that are compatible with the player - for example Apple protected AAC files will not play in a non Apple device.
My friend has given me
Go to the player manufacturer's website. They should have software you can download that may make the process much easier.
If not, on plugging the player into your computer, it should recognize it as an 'external' drive in which case you can treat it as you would with any external drive.
CREATIVE ZEN 8GB BRIGHTNESS AND LOCK+SHUTDOWN
for me is same problem only my zen is 2gb software reinstalling wont fix it i dont know how fix it someone help. first tiime i saw this problem when i connect my player to 9V battery my zen restart and brightness set to 10% i set for 100% but brightness still left like 10% .try this push play bution and hold all time, then push reset bution and hold with play bution , and then turn on your zen Your zen now on on recovery mode pusg reload firmware and then reboot (simply system "play bution+reset+bution+on bution= recovery mode" ) note: disconect your zen from usb cable and ensure that your zen baterry is 50% or higer
SORRY FOR MY ENGLISH I AM FROM LITHUANIA
Not finding what you are looking for?