20 Most Recent GE Profile 26.6 cu. ft. Side-by-Side Refrigerator with Dispenser TFX27PRBWW - Page 5 Questions & Answers

Manufacture date is on a plate on the back of frige or on a sticker on the inside of the door

You will need to replace the "ice bucket assembly". Here is the assembly to order.

You will need to replace the control board for the ice maker. Here is the part to order.

Remove the ice bin. Look at the back wall, behind where the bin was. You should see a rectangular hole, about 1.5 x 1 inches near the bottom of where the ice bin was. There should be a white plastic part inside the hole. This plastic part should be able to be lifted up with your finger, and drop down again when you release it. If is does not move, it may be frozen, or the electrical solenoid connected to it may have melted. If the part moves freely, just replace the ice bucket and try to dispense cubes again. (the metal arm sticking out the back of the ice bucket might have gotten on the wrong side of the white plastic part in back)

F9 indicates a problem with the wiring specifically listed as program w/ door circuitry. A qualified service tech may be the best choice to fix this problem.

First, check the condenser coils for any lint and dirt buildup and see if the condenser fan is running fast. Post back your results.

Sounds like the auger motor froze . Remove the ice bin and , using a hair dryer , heat the forks on the dispensor motor . This will thaw out the armature of the motor . Try pressing for ice occasionally to see if forks turn , Have to close the door or push in the lite button to test .