20 Most Recent
Ricoh Aficio 450e Black and White Copier - Page 7 Questions & Answers
How to solve this error SC 553 on a ricoh machine
It depends from machine to machine. on some you just need to enter into service mode and then copy sp or system sp. On other Ricoh machines you need to execute a reset. first of all turn on the machine, and make sure no print jobs are present, or remove the network print or USB print cable and then turn on the machine. This is just to make sure that no print jobs are present, because this will make you to not be able to enter in service mode. This code SC553 also and other similar SC codes like 551,552,544 and etc. are connected with the Fuser unit. Most of the time is just triggered as security for overheat to stop a melting or fire. So if you reset the machine with procedure you may make damage, but in most cases is harmless. But if you reset the SC553 and then after short time reappear than the machine have real problem and need to be fix, do not reset it more than to to times in a row on a short time period. To enter into service mode press the following keys in the following sequence: press the yellow(clear) - then press 1 0 7 (numbers on the keypad) - then press and hold it pressed the red stop button until service mode appear on the screen. when service mode appear on screen enter into (copy sp) or (system sp) depend from the model of the machine. Then with the keypad press 5-8-1-0-# on the screen should appear Fusing SC reset, press execute and after show complete turn off the machine and wait at least 30 seconds, turn it on again. if its ready the sc is clear. But if the sc repeat the machine have a serious problem with the fusing unit and need to be fixed, if you try to reset the machine with this reset to much in short time you may just add more damage. for more detail post the model of the machine.
I have stripped of ricoh MP2501L 8 times having same error on screen as ' open instructions on right side to solve
What is the actual problem. Is it sensors or what.
SETTINGS YOU CAN CHANGE WITH USER TOOLS
General Features Panel Key Sound The beeper (key tone) sounds when a key is pressed.
• Default: On Copy Count Display The copy counter can be set to show the number of copies made (count up), or the number of copies yet to be made (count down).
• Default: Up (count up) Function Priority You can specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.
• Default: Copier Print Priority Set the print priority for each mode.
• Page 20 "Multi-Access"
• Default: Display mode
• When [Interleave] is selected, the current print job will be interrupted after a maximum of five sheets. Display Contrast You can adjust the brightness of the display. Key Repeat You can select whether or not to use the key repeat function.
Measurement Unit You can switch the measurement between "mm" and "inch".
• Default:
• Metric version: mm
• Inch version: inch
Ricoh Aficio Mp C2050 error code sc491 what is the poblem
High voltage power: Drum/ development bias output error
An error signal is detected for 0.2 seconds when charging the drum or development.
• High voltage leak
• Broken harness
• Defective drum unit or development unit
• Defective HVPS-CB board
Ricoh 2510 copier error code 322
Ricoh 2510 copier error code 322 means bad LDB or bad Detector Board. To reset this error, please try the code:
Clear Mode along with 107+Clear/Stop and hold for 5s.
Not finding what you are looking for?