How to remove front panel on GE model GT65EBMK0DG dryer
GTD65EB - if this was your actual model number line, which you seemed to be missing, you need to take off the shoulder 1/4 screw in the back on the control panel, then remove the control panel pushing away fromy you, then your remove the two philips screws located under the control panel, open the dryer door, then remove the two philips under the lid, then move the lid back and then remove the two shoulder philips screws holding on the front of the unit. then pull the front of the dryer towards you, then remove the dryer front by pulling up, disconect the door switch wire, and the lamp wire on the top if yours has a door lamp. make sure its unplugged before attempting, if you have issues call GE appliance service for repairs.
1/24/2019 4:04:23 AM •
GE Dryers
•
Answered
on Jan 24, 2019