GE Profile DPSB620ECWW Electric Dryer - Answered Questions & Fixed issues
Clean Lint Filter Light/Possible Heat Problem?
Take the front panel off the bottom and check the big hoses that connect to the drum. From what you are saying, the fan is working but not drawing air through the drum. That is why the light is on because it is not sensing air flow through the connections to the drum.
12/2/2013 5:41:31 PM •
GE Profile...
•
Answered
on Dec 02, 2013
•
211 views
Dryer runs for a short period of time and then
it is proberly lint stuck around the motor and fan resticting air flow to the motor and the motor is shutting down because it is to hot vac out around the motor and inside the cabinet
12/1/2011 4:42:15 PM •
GE Profile...
•
Answered
on Dec 01, 2011
•
215 views
The drum barrel is squeaking loudly....how do I
For a quick inspection, the back is easier to remove to gain sight of the potential problem. Make sure the power is off. You will probably find the drum rubbing somewhere and have to release the weight of the drum to check bearings.
8/31/2011 7:42:39 AM •
GE Profile...
•
Answered
on Aug 31, 2011
•
103 views
I have a gas dryer
Check the "thermistor" that is on the blower housing for continuity with a multimeter. It should read 2.27k.
If you get any other reading,
replace it with this part.
Richard
Roth
The
FixYa Team
8/14/2011 5:43:20 PM •
GE Profile...
•
Answered
on Aug 14, 2011
•
98 views
No heat
Hi,
If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly.
if you dryer is gas check out this
gas no heat tip....
If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat.
check outthis
electric no heat tip...
heatman101
8/5/2011 9:01:17 PM •
GE Profile...
•
Answered
on Aug 05, 2011
•
63 views
Dryer runs but there is no heat. Reset breakers
Hello & Welcome to FixYa
If you have already tried cleaning the vent then the problem is with the Thermal fuse. When the thermal fuse goes bad it cannot be reset and replacing it is recommended repair.It is located on the blower wheel housing inside the rear panel to the exhaust duct. Please get back to me if you have any other questions.
Kevin
11/8/2013 1:35:03 AM •
GE Profile...
•
Answered
on Nov 08, 2013
•
245 views
Dryer will not dry
Hi,
If your dryer is not drying like it once did or if you just have not taken the time to give yourself a clean dryer in a long time then you need to do that. At least once a year the dryer cleaning should take place. Lint build up in the dryer duct is one of the main causes for your dryer to fail.
Here is the rest of this tip about Dryer Maintenance
heatman101
2/1/2011 11:23:11 PM •
GE Profile...
•
Answered
on Feb 01, 2011
•
65 views
PROBLEM: Dryer doesn't always heat.
Normal
0
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";}
Hi,
If you are having problems with your gas dryer not heating
the most common problem is that the ignitor goes bad. Even though it glows
sometimes it is still not working properly.
if you dryer is gas check out this gas no heat tip....
If you have an electric dryer, you can have many different
things that can go wrong causing the dryer not to heat.
check out this electric no heat tip...
heatman101
9/16/2010 11:05:53 PM •
GE Profile...
•
Answered
on Sep 16, 2010
•
160 views
Replace a belt
at the very front corners of the console you will see 2 phillips head screws holding the console down(newer dryers have these in the rear).If you do not see the screws then they hidden under the endcap of the console. These endcaps are very easy to pop off. Just insert a flathead screwdriver under the top rear of the endcap, and pull towards you. After the endcap is off the screws will be at the base of the console. After the screws are out you can flip the console backwards, exposing three 1/4" screws (left)(middle)(right) near the rear panel that must come out so you can slide the top forward(not up) off the machine. Once all this is complete you will see 2 screws on the front panel(left)(right) side and your door switch wiring. Also you must take off the lower front panel to expose the other 2 screws that hold the front panel on. And this should give you full access to everything. ***warning*** there are a few newer styles still that do not use screws or endcaps but rather a small metallic clip that must be depressed with a putty knife(rarer style) If that is the case once you depress the clips in the lower corner(under the console), the rest of the teardown is the same as I have just explained!! Hope that helps
9/11/2010 10:19:25 PM •
GE Profile...
•
Answered
on Sep 11, 2010
•
68 views
DPGT650EHMG CLEAN LINT FILTER LIGHT WILL NOT GO
Hi
Thanks for using FixYa. To start with the first
thing you should do is to remove the lint filter and clean the lint out of
inside where the lint screen goes. After this unplug the unit for 5-10 minutes
and then push & hold the start/pause button for 10-15 seconds and reconnect
the unit. If still it won’t work then it’s the sensor that has gone bad and
needs to be replaced. Please do rate the solution if the issue is resolved or
post a comment for further assistance.
Thanks
Rylee
6/16/2010 4:50:21 PM •
GE Profile...
•
Answered
on Jun 16, 2010
•
978 views
Not finding what you are looking for?
