20 Most Recent
Brother SX-4000 Typewriter - Page 8 Questions & Answers
I have an SX-4000 Electronic
Try this procedure to set and adjust the margin:----
Use
the "Space" and "Backspace" keys to set the margins by
positioning the carrier where you want each margin. Press the "Alt"
key along with the "L Mar" or "R Mar" key, depending on
which margin you are setting, left or right.Press ALT with L Mar key to adjust margin on left side.Press ALT with R Mar key to adjust margin on right side.
-----------------
For more help.Click this link below and check page number 11:----
http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_SX4000_EN_219.PDF
------------
This should help.Thanks.Helpmech.
WE CHANGED THE DAISY WHEEL IN OUR MACHINE &
First, be sure you are
using a Brother compatible daisywheel. Some other manufactures' daisywheels
"look" the same but the charters are in different order, so they will not
function properly.
After changing the daisywheel
you need to d a reset. Hold down CODE and press "Q"
the carriage will do a little dance and your machine should be good
to go!
What is the homing pawl? And how do I get it
The homing pawl is homes the print wheel on power up. You need a tech that knows brother T/W's. If you want to send it to us we can.
DickyO
Cleveland Business Machines
216-241-0027
How to do margine release
Move the carriage (print head) to the margin you would like to
clear. When you hear the beep, hold down the [ALT] key and press [3]. Now use
the backspace or the space bar to move the carriage to where you want the margin
set. Now hold down [ALT] and press [4] to set the left or [5] to set the right
margin. For your further reference, I have included the keyboard special key
chart. You might need to download the pic and zoom in to read it.
How do I install daisy reel?
Go to brotherinternational.com, click on support. Poke around in there you will find a manual for your T/W.
Dickyo
Installation of daisy reel
Go to brotherinternational.com, click on support. Poke around in there you will find a manual for your T/W.
Dickyo
I have a brothers sx-4000
There are two things
that people mess up when changing printwheels and ribbons. Is that the ribbon
is not in the guides properly. The other is that the latch the holds the type wheel
is not locked in the forward position.
We have a sticker stuck
Some Brothers are easy some hard.
Go to brother.com, click on support. Poke around in there you will find a manual for your T/W.
Dickyo
When i type the letter
If you are not in a language mode or proportional Space you probably need a tech to replace the P/W homing pawl.
DickyO
Not finding what you are looking for?