Brother SX-4000 Typewriter - Answered Questions & Fixed issues
WHAT IS PRINT SOLENOID CAP
Ir is a small piece of plastic that fits on the print solenoid plunger on Wheelwriter typewtiters.
DickyO
The hammer does not move
This problem is the print cam and would require a replacement part you could locate the closes Brother dealer in your area and they should be able to perform the necessary repair. Brother can give you your closest dealer by calling (877) 276-8437.
How do I remove the cover?
You need to open the clear plastic cover, then look in the inside of the machine and there is a clip on each side. You will have to pull twords the center of the machine to release the catch AND pull up on the outer cover. Then run your finger nail or small flat blade screwdriver between the top and bottom covers at the front of the unit (below the space bar). Lift from the front and it should come off. The inside latches can be hard to pull so may take several attempts to get it open.
Not finding what you are looking for?