HP Mobile Remote Control For Pavilion Dv4/Dv5/Dv7 Series PC - Answered Questions & Fixed issues
My HDMI doesn't work, I plug in the cable and it
bet you they forgot to plug in the HDMI socket on the outside case of the laptop onto the motherboard of the laptop !
had experience of no sound on a tv that was repaired under warranty but could not fix it as I was not allowed under warranty to open the tv and plug in the sound cable to the mainboard. TV had to be sent back again for repair . and it ended up being the sound cable as I had pleaded with the manufacture to replug in without 6 weeks wait for the tv to be sent and repaired by a warranty repairer !
Remote controll driver for dv6000
You can try running windows update via the control panel in windows, or looking up the dv6000 on HP's site and look for product downloads. It should have a listing of all the available downloads for that particular laptop model.
Hello, I am searching rc6
Hi,
the drivers you are looking for your HP Pavillion DV7-1170 IR receiver are located here:
Click Here.
Hope this helps. If it does, please accept and rate the solution! Contact me with any more questions you may have. Thanks for using FixYa!
My hp mobile remote control is not working
Hi okyerekdwent,
Try changing the battery in the remote. The battery might be dead. If it still doesn't work do a system restore to a date you remember the remote was working, as some applications might have disabled or removed the IR driver.
DV5-1138tx Remote not working
uninstall all the security software ..if any ..or
disable firewall
If u are using Norton Uninstall the software
this will make it work
also Note:-Vista has conflicts using the remote connecting any VPN network
Can not adjust volume
dere may bea problem wid d battery ,try replacing the battery ...if the laptop is in warranty den get d remote repaired ...
although u can repair it urself by opening d remote and rubbing d contacts wid some metal
Where is the Logik LPV 09 HP reset button
The location of the reset button on the Logik LPV 09 HP would likely be in the owner's manual or on the company's website. It is also possible that the device does not have a physical reset button and can be reset through software or by unplugging the device for a certain amount of time. If you cannot find the information in the manual or on the website, you should contact the manufacturer for assistance. if i was able to help my cashapp $ralphpapi thank you have a blessing day
I try to start a HP iq775. When I press the power button I heard one short beep and I see a red light red and then blue, and turn off inmediately. The PC won't start. The power supply works fine. Help
All HP iq77x all-in-one PCs suffer from the same problem of a faulty motherboard. This is primarily a soldering issue on the graphics chip,which develops cracks in the solder balls. The PCs contained a separate graphics card, which goes faulty first. This can be removed and the display connector can be moved on the motherboard to use the on-board graphics. This will eventually show the same issue. A short term fix was to heat the graphics chip with a hot air gun or other means (plenty of suggestions can be found on-line) which sometimes works for a few weeks at most. The only 'permanent' fix is to have the chip professionally removed and re-soldered; an expensive option.
If you are lucky, your PC is still wired to use the add-on graphics card, in which case you might be able to remove this and rewire for the motherboard graphics.
Not finding what you are looking for?