20 Most Recent
ASUS P5KPL-AM SE Motherboard - Page 4 Questions & Answers
When ipower on cannot display
If it seems like it booted up all the way (fans running, hard drive spinning) but the display is black try the steps below.Shine a flashlight on the dark screen to see if you barelysee the icons on the desktop. If so, then the LCD Inverter is bad. Plug in an external monitor and see if the display shows up on it. It can beany kind of monitor even the old big fat crt monitors as long as it has a vgacable to connect to your computer's vga port. If so that proves yourvideo card is ok. The video will show on most systems when you rebootwithout you having to do anything. Some systems will require you to hit the FN(Function key) + F1 thru F12. Hold down the FN key then hit the correctkey for displaying on the monitor (F1 thru F12). The correct key willnormally have CRT/LCD on it or it will have the icon of a display. If you see no icons by shinning a flash light and the external monitor works,then your screen is bad. If you see no icons by shinning the flash lightand nothing shows on the external monitor, then most likely your video card isbad.
How can I attach an IDE printer port
You will need to look for a PCI expansion card. If you go on Google and type in the search PCI LPT card, you will find quite a few ranging in price from $6-$30 each. Hope this helps
Blue screen
is this happening all of the time or when your computer is running??Test all leads that attach to your hard drive including electrical extensions,IDE,SATA
the leads from your ((motherboard to your hard drive)) make sure they have a secure dust free connections and are not faulty
computers need power and data to travel through every working device and to continue its cycle and to have an end so any faulty leads will end up with a computer error
Click start control panel administration tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers
You might need to upgrade your graphics card drivers
you might have to remove your graphics card to make sure the socket is clean
restart your computer the reinstall it this should activate found new hardware wizard
if your computer came with a mother board disk the drivers could be on it
click start control panel,display,desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system
also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settingsalways click APPLY after making any changes
if you need more help with this post a reply hope this helps you
I've loose my LAN setting
Is your PC connected with other PC's to a work network or to a home one ?Is your Pc connected via Lan to a router ?Be specific
P5KPL-AM mb bios only four line display
Try another monitor, if problem still exists your VGA is damaged, if youre using the onboard vga then connect a PCIex vga card get into bios (suppose the display problem is solved) and disable the onboard VGA option. Keep your pc running like this (using external VGA adaptor).
No display
Tell me if you can see anything on the monitor while the pc is booting/starting.Is your monitor connected correctly ?Is your monitor operating well with other PC?This motherboard you have has an onboard VGA card. Check if you have a PCIex VGA card connected on the motheroard.In case you have one then deactivate the onboard one through the bios and connect your monitor to the PCIex one.If you dont have an external PCIex card thenGive me more details if you want me to help you.
P5KPL-AM speaker beep
Hello, I am the technician that will be assisting you today. My name is Norman-Wynne Damstra.Welcome to Fixya, Sadael.Yes some-times the case/computer chassis does not have an internal BIOS/CMOS beep code speaker built in.So what you will need to do is go to your local computer store and purchase a mainboard beep code speaker. You may even find it online at your favorite computer store.The modern speaker is very small compared to the older mainboard beep code speakers.Your computer will continue to work without the speaker, the beep code speaker is there to help diagnose/troubleshoot problems when they occur.Take care!Norman-Wynne Damstra
P5KPL-AM motherboard is not booting
you must reformat it.. because of the spyware or any virus that it has..
it will affect the other computers.. so if you want this will you do...
you must reformat or putting a new OS in one of your computers.. then to easy copying..
cloning is the solution of it..you must clone the other hard disk in the first one that you put on a new OS.. then apply to all of your units..
PS: every time you cloned a hard disk you must change the IP ADDRESS to make sure that you will have a continues workgroup.. and preventing the duplicate IP address...
When open the PC,suddenly the
for me its a virus problem. formatting your pc may take away the problem but if the virus is coming from the other partition you have to conduct a full format install a license anti virus and don't forget to update it for better virus protection before installing anything else. most of the time viruses came along with the application you install to your computeri wish this solve your problem good luck
My mother board on desktop
check you bios setting 1st boot should be your hard disk if your hard disk model is not shown in the selection then select HDD-0 as your first boot this will solve your problem this solution only works if your hard **** is detected during POST if not detected check the power connector and SATA or IDE cable of your Hard Disk
I have asus motherboard of
You can download it from
HERE, but you'll need to select the Operating System. Let me know if you need further help.
Good Luck.
Thanks for using
FixYa.
Not finding what you are looking for?