Top 10 ASUS P5KPL-AM SE Motherboard Questions & Answers

Hi!

Try these links I found

http://www.bioticaindia.com/p5kpl-am-se.html

http://www.nodevice.com/driver/P5KPL-AM_BR/get55692.html

mobo asus p5kplam -se tidak bisa masuk bios

Older motherboards have USB 1.1 ports;
newer motherboards have USB 2.0 ports,
which are over 10 times as fast.

It is Windows (not your motherboard) that should do the "Plug-and-Play" thing for devices connected to your USB port(s).

Note that some devices are USB 2.0, and will *NOT* work when plugged-in to a USB 1.1 port.

Either get a newer motherboard, or get a PCI add-on card that adds USB 2.0 ports.

Pc saya mengunakan Motherboard P5KPL-AM SE dengan prosesor intel Core 2 Duo 2,8 GHz, Memori VGEN 2 GB PC 5300, harddisk seagate SATA 250 GB 7200 RPM
Pc saya tidak bisa boting dan setiap dinyalakan, 15 detik kemudian mati.
saya juga tidak bisa masuk ke layar bios.

check device manager...mungkin driver belum install lagi.install driver sound card

If your case is not setup for chassis intrusion, the motherboard has dropped a jumper.
The location is by the last PCI slot between the CD audio connector and the USB bus plug. (it is right next to the CLRTC jumpers)

Good luck

you connect your front panel cables to to the motherboards front panel connectors to activate the front panel audio.

for more reference you can download your motherboard manual in Asus website below

http://support.asus.com/download/download.aspx

You can download the drivers from ASUS WEB site. Selectyour model motherboard/computer/laptop, and make sure you select the Windows XPor Vista version of the drivers that matches your Windows operating system.Please click on this link to their WEB support site : -http://support.asus.com/download/download.aspx?SLanguage=en-us

Hello there,


Below is an image of *********** Board with number indication and wiring explanation. From your manual page 1-6 you can see the image below and 1-7 for the connector, jumpers, slots. as indicated in your problem I will only answer problems related to the wirings.

• For the Front Panel

1. There are 8 wires from the front panel's casing, excluding USB connectors and front audio cable.

2. Just plug the front panel switch headers to the F_Panel main board connectors. 1 & 2 are positive, if the led do not light change polarity but Im sure it will.

Note:The mainboard provides a front panel connector for electrical connection to the front panel switches and LEDs. JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.

• For the USB connectors

1. If your casing has a USB header on the front bezel you can put it on any connector. You can also purchase a USB module cable or an internal card reader and plug the headers to any of those connectors.


Note: Observe Polarity, do this Vcc, -Data, +Data, Gnd ,(NC) ground is always near to NC.

Plug it at your own risk, reference image are already shown.

• Front Panel Audio connectors

1. Look for FP_Audio header from your casing and plug it to the connector.

*Asus recommend you connect a high definition front panel audio module to this connector to avail of the motherboard's high-definition audio capability.



Hopefully this information helps.


Thank you for using FixYa.

During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or the F2 key

Press and hold that key during the boot up process to enter BIOS the using arrow key scroll down to advanced bios features press enter change your first boot device to your desired device ,press escape then press f10 to save to cmos to restart

http://www.howtogeek.com/howto/16822/boot-from-a-usb-drive-even-if-your-bios-wont-let-you/

boot from a usb drive

hope this helps