HP Officejet 6500 Wireless All-in-One InkJet Printer - Answered Questions & Fixed issues

I would lift the top up...and on the back left corner is a slot that the tab from the lid goes into to say the top is closed, I would stick a piece of paper of cardboard in the grove, or slot and see if that works..I think it is a light beam type switch, and not a mechanical switch that telsl the printer the lid is down..so you basically blocking light when cardboard is in that slot... Kenny

Press Start Devices and printers Find the printer you wish to bring online If you are using windows xp- double click on the printer If you are using Windows 7 or vista- right click on the printer and select "see what's printing" Hit "printer" in the menu bar Toggle the "use printer offline selection"

Checking ink levelsUse one of the following methods to check the ink levels. Method one: Check the ink levels from the HP All-in-One The ink level is displayed on the main screen of the control panel display. Locate the two icons that represent the print cartridges. The icon on the left is for the color cartridge and the icon on the right is for the black cartridge.

• The exclamation mark (! ) symbol indicates a low ink level.
• The question mark (? ) symbol indicates the product cannot determine the status of the print cartridge. This might be because the cartridge is refilled.

Figure 1: Ink levels on the control panel display 1 - Exclamation mark indicates low ink in the color cartridge 2 - Ink level in the black cartridge is OK Method two: Check the ink levels from the computer using the HP ToolboxFollow these steps to check the estimated ink levels using HP Toolbox.

1. Make sure the product is on and connected to the computer.
2. Open HP Solution Center .
• Windows XP: On the Windows taskbar, click Start , click All Programs , point to HP , and then click HP Solution Center .
• Windows Vista: On the Windows taskbar, click the Windows icon ( ), click All Programs , click HP , and then click HP Solution Center .
• Windows 2000: On the Windows taskbar, click Start , click Programs , point to HP , and then click HP Solution Center .
3. Click Settings .
4. Point to Print Settings , and then click Printer Toolbox . Printer Toolbox opens.
5. Check the ink levels displayed on the Estimated Ink Levels tab.

Figure 2: Estimated ink levels

Enlarging photos will definately lower the quality of the original photo try using some software like photoshop to enlarge it to some extent and then try to print.

: Check the power cord

1.
Turn on the product.
2.
Remove the power cord from the back of the product.
3.
Check the power cord for any physical damage. If the power cord is damaged, replace the power cord.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

Turn the product off and then on again

1.
Press the Power button ( ) to turn the product off.
2.
Wait 60 seconds, and then press the Power button ( ) to turn the product back on.
3.
If the product does not turn off when the Power button ( ) is pressed, wait three minutes, and then proceed to the next solution.

Plug the product into a wall outlet
Follow these steps to make sure the product is plugged in correctly.

1.
Unplug the power cord from the back of the product.
2.
Unplug the power cord from any surge protectors or power strips.
3.
Select a wall outlet to plug the product into. Test the wall outlet by plugging another electric appliance, such as a lamp, into the wall outlet and turning it on. Unplug the test appliance.
4.
Plug the power cord into the back of the product.
5.
Plug the power cord into the wall outlet.
6.
Press the Power button ( ) to turn the product on.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

Solution six: Reset the product
Follow these steps to reset the printer.

1.
Unplug the power cord from the back of the product.
2.
Unplug the power cord from the wall outlet.
3.
Wait 10 seconds, and then plug the power cord back into the wall outlet.
4.
Plug the power cord into the back of the product.
NOTE: Many power cords have an LED light on the power module or on the end of the cord that plugs into the product. Make sure the LED light is lit and steady.
5.
Press the Power button ( ) to turn the product on.

*
If these steps resolved the issue , you do not need to continue troubleshooting.
*
If the issue persists , continue to the next solution.

6. Perform a partial reset of the product

1. Disconnect the power cord from the product.
2. Wait for 20 seconds.
3. Press and hold # and 3 while reconnecting the power cord.
4. When the product turns on, release both buttons.
5. Try printing again.

IF still won't resolve it by following steps mentioned above then your printer needs replacement. Malfunctioning hardware.

3 Easy steps to Fix Hp Printer Error 0x610000f6 You Normally encounter Hp Printer Error 0x610000f6 if you have HP printer, hence the customers who face this issue and are watching for the best solution, then here for all of them, we have introduced some Hp printer troubleshooting steps, hence carefully read the complete information provided here in this post. If you have some mechanical knowledge, then it would be more straightforward for all of you to fix the error. The Hp Printer Error Code 0x610000f6 is connected with the Hp printer jam carriage problem. This error gets presented on the screen when something proceeds wrong with the jam, or a paper jam has happened earlier. First You want to Check this Problem then Implement Solution for Hp Printer Error 0x610000f6. Step 1:- Power Off Your Printer, and switch it On Again. Step 2:- Check of Any Paper Jams in the printer. Step 3:- Confirm That Your HP Printer Cartridge is Correctly Connected. To Fix Hp Printer Error 0x610000f6, you want to join with Printer Error Support specialists. You can also follow the easy steps to Fix Hp Printer Error 0x610000f6 are given below in this BLOG.

HP Printer Error 0X610000F6 also known as Carriage trouble Error arises very often in the HP Printers. When trouble happens in the printer due to paper cuts or due to any other reason, the printer stops running and it doesn't print any paper. check this method to resolve. 3 Methods to Resolve Error 0X610000F6:- 1. First, Switch the OFF and Switch the On your Printer. 2. Remove all the Paper stuff that is Blocked. 3. Check Whether the Printer Cartridges are properly attached or not and Remove any jammed papers. WANT FULL SOLUTION CHECK HERE - Hp Printer Error 0x610000f6 If you want a perfect & right solution recommended by an expert. follow the blog steps which are mentioned.

HP Printer Error 0X610000F6 also known as Carriage trouble Error happens very often in the HP Printers. When trouble occurs in the printer due to paper pieces or due to any other reason, the printer stops running and it doesn't print any paper. 3 Steps to Resolve Hp Printer Error 0x610000f6:- 1. First Turn the OFF and Turn the On your Printer. 2. Clear all the Paper stuff that is Blocked. 3. Check Whether the Printer Cartridges are properly connected or not and Remove any jammed papers. Many ways can be followed to fix the problem of Hp Printer Error 0x610000f6. if you want a perfect & right solution recommended by an expert. follow the blog steps which are mentioned.

Try reconnecting a control panel. In the video below, we show how to fix the control panel, there you will see where the ribbon cord needs to be reconnected. Also, check the logic board connection if this doesn't work.

This video shows how to change ink cartridge on HP 6500 and 6500A

Disconnect the power cord of the printer from the electrical outlet.
Wait at least 30 seconds.
Press and hold the # and 3 buttons while reconnecting the power cord.
When the printer turn on, release both buttons.
This will reset the printer.

Lcd is not a replaceable part.
try these steps to resolve problem
- unplug the power cord from the back of the printer while it's turned on - wait for a minute before you plug it back in - if it does not solve the problem - unplug power cord from the back again while machine is turned on -wait for a minute,push pound key and 3 while plugging power cord back in -lastly,if the first two do not solve the problem - try pound key and number 6 same path above -if issue still exists,printer needs to be replaced

This should be a good guide through fixing the screen. You will need a star shaped t10 and t8 screwdriver tip and a heat gun or hair fan with heat setting:

Try this fix

Check this repair tip out. Works for me almost everytime:

This is a common error, but usually can be fixed without replacing any parts. See video:

1. Plug it directly into the wall, rather than into a UPS
2. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One and also disconnect power cable from All-in-One and also from wall outlet.
3. Wait 30 seconds.
4. Plug in the power cable to All-in-One and also to wall outlet.
5. Check for the functionality.

I still had the error message, so they said to reset the printer to factory default settings:
1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.
2. Then, press and hold # and 6 while plugging in the power cord.
Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.

If those two steps do not resolve the problem then its is hardware related and can't be solved here.