Top 20
Belkin F5D8236-4 Router Questions & Answers
I have lost my wireless connection for my laptop
If at any time you pressed the reset button on the router, it resets it to the factory, out of the box, settings. Have you tried logging back into the router just like when you first set up the laptop and kindle? you may have to start from scratch or log into the router to check what is connected via numbers.
Lg smart phone
Does the phone work on other routers? eg hotspots, cafes, restos?
No internet access
First of all, connect with a utp cable and configure the wireless settings.
Forgot my password
hey just check out in your router back side small reset switch so please press it for 20 seconds and your password is reset to default.
DHCP Problems
Routers have a built in DHCP server to identify each computer connecting to it so traffic can be routed to the correct computer, if more than 1 computer/device shares the same IP you should get an IP conflict not a DHCP error. Routers also normally give out IP addresses from its pool of IP's sequentially and assigns it to expire in 24 hours, so if you reboot your router turn on 1 device grab an IP and then turn that device off, reboot your router and turn a different device on it will get the same IP, now when you turn the other device back on you have a conflict.If your router has been reset you have to release and renew IP addresses on all your devices to prevent conflicts.
Wireless not working
To reset the Belkin back to the default settings - Press and hold the pinhole RESET button at the back of the router and then power for at least 15 secs. Then release the RESET button. Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
My router does'nt read the modem, it never stop boothing!
Remove ALL cables, verify connections , connect cables, Unplug the Modem, remove battery, unplug the Belkin. Install battery in Modem and plug in, let it run a selftest, when finished, plug in Belkin allow it to selftest. Reboot computers.
How to reset password
At bak of the router or underneath of the router there must be a reset , press it and hold it for 30 sec the release. power cycle the router.
The wireless light will not come on belkin router
Try pulling the power cable for 15 seconds on the modem, then plug it back up and then wait for all of the lights to come back on. Then pull the power cable on the router for 15 seconds, plug it back up. Also you have a reset switch on the back of the router that may help if the power cycling doesn't work. Hope this helps fix your problem-good luck...
How do you set up
Your iPAd should see your wireless network like other devices do. Does your iPad not prompt you to connect to your home network? If it does you should enter your wireless pass key manually on your iPad.
Help me with my wep key please
Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543
Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1
Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1
D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1
Encore - Username: admin Password: admin Default IP address 192.168.1.1
Linksys - Username: admin Password: admin Default IP address 192.168.1.1
NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1
TP-Link - Username: admin Password: admin Default IP address 192.168.1.1
TrendNet - Username: admin Password: admin Default IP address 192.168.10.1
Zhone - Username: admin Password: admin Default IP address 192.168.1.1
Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1
My Belkin F5D8236-4 v3 Router
Try resetting the router. There should be a little hole somewhere on it with a button inside that you can press with a paperclip. Try holding that button down while you unplug then plug the router in while holding it (if possible). If that doesn't work, I'd suspect the storm might've damaged the router somehow. Was it plugged into a surge protector, and/or have you noticed any other issues with anything else that was turned on at the time?
Not finding what you are looking for?