20 Most Recent
Motorola MR355R Two Way Radio - Page 3 Questions & Answers
How to RESET MOTOROLA CP1660 handheld radio -
Entering Front Panel Feature and Button
Configuration Mode
If your radio is turned ON, turn it OFF. Press and hold the side
programmable button 1, and turn your radio ON. A tone is
heard, indicating that your radio is in Feature and Button
Configuration Mode. The indicator illuminates and the
"BCKLIGHT" is displayed on the radio LCD screen.
Whenever the radio is turn on, it initiates a self-test routine which checks the RAM, EEPROM
hardware and EEPROM checksum. If Self Test passes, the green LED flashes once and a Self-Test
Pass Tone is generated. If unsuccessful, the red LED flashes rapidly and a Self-Test Fail Tone is
heard
You may need the programing software to do the reset the manual does not give you any info on resetting the radio
How can I get my Motorola CLS1110 to talk to my Baofeng BF 888s?
The CLS has preprogrammed frequencies. The Bao can be user programmed. If both are Uhf, the Bao must match the CLS unless one of the CLS frequencies is already in use in the Bao. So, are you already using CLS and adding radios? You need the actual frequency and tone code. If you do not understand, contact a dealer like us, local is even better! Channel 1 is only an indicator, not a frequency.
[email protected]
Motorola CP200d radio volume too loud and will not adjust lower.
Hi there,
there are two things to be check, first volume control need to be check , and if is it OK/read the radio and re check the audio configuration in the cps, and re-try, if still the same , if you have the same radio and know on how to clone?you may clone it, and re-try, if trouble still exist,please, kindly bring it to the nearest shop in your place,
have a great day,
j
MT-777
You must buy Motorola software from Motorola. Get a cable from them also. You also must have an FCC License to legally operate these radios. Your best best is to go through a dealer. The FCC License is quite hard to do without a dealer guiding you. It is easy to be ripped off and you must go through a coordinator. If not USA, still go through a dealer. The software and cable issue does not go away, ever.
Motorola cp200d will not work with a headset.
A few things come to mind: 1) Be certain your radio is turned off when plugging in an audio device. This insures they are pairing properly. 2) Be certain the audio device is plugged in all the way to the click position. You should feel a slight click when it is seated properly. 3) If the jack on this radio is slightly wobbled out from audio devices being plugged and unplugged the headset's plug may not be touching the sweet spot to make transmitting possible. Press slightly to the side on the plug's grommet to see if it works. If this is the case, trade headsets with another unit and see if you still have the same problem. Sometimes it is as simple as playing musical chairs with audio devices. 4) If you are using the radio in digital mode, not all audio devices will work. Check with your Motorola dealer to see which audio accessories will work with your unit in digital mode. (They will have a digital emblem stamped on them.)
Not finding what you are looking for?