20 Most Recent
Sentry Fire Safe - Safe - DS3607 - Page 3 Questions & Answers
How to open Sentry safe ms3817?
There are several possible reasons why your Sentry Safe MS3817 is not responding to the handle or new batteries. Here are some steps you can try to fix the problem:
- Check the batteries: Make sure the batteries are properly installed and not depleted. You may also want to try using a different set of batteries to see if the issue is with the batteries themselves.
- Check the battery contacts: Make sure the battery contacts are clean and free of any debris. You can clean the contacts with a soft cloth or toothbrush.
- Check the handle: Make sure the handle is not damaged or stuck. You may need to apply some lubricant to the handle to loosen it.
- Check the lock mechanism: Make sure the lock mechanism is not damaged or stuck. You may need to apply some lubricant to the lock mechanism to loosen it.
If none of these steps help, you may need to have the safe serviced by a professional. As for the factory code, it is recommended to contact Sentry Safe or the retailer where you purchased the safe for assistance. They may be able to provide you with the factory code or help you reset the safe.
Changing the code on sentry safe csw3607
To change the code on a Sentry Safe CSW3607, follow these steps:
- Open the safe by entering the current code on the keypad.
- Press and hold the "*" button on the keypad for three seconds. This will put the safe in programming mode.
- Enter the current code on the keypad, followed by the new code you want to use.
- Press the "#" button to save the new code.
- Close the safe and test the new code to make sure it works.
It's important to note that the CSW3607 has a factory default code of "0000". If you have not changed the code from this default, you can simply enter the new code you want to use without going through the programming mode.
What's default code for H060E Sentry Safe?
There is no such thing as a 'default code'. Safes are made and sent out with a set code which is written down. You are encouraged to change that code to one of your own. Once that is done, the original code is erased and will never work again. There is no default code or a magic code that will open the safe.
This is the way to get into the safe.
Call a mobile locksmith. Tell them it is an electronic lock and ask if they have a rare earth puck magnet? They will use the magnet to draw back the electronic bolt.
https://www.google.ca/search?q=open+safe...
There is a second way, you use and angle grinder or concrete saw to cut the front or the back off it.
They are very insecure, so you may be able to open it by banging the top with a rubber mallet and turning the catch at the same time! This is called the 'bump' or 'slap' method.
Videos. Easy ways to open a Sentry Safe!
https://www.google.com/search?q=open+sentry+safe+without+tools
..
Not finding what you are looking for?