20 Most Recent
- Page 3 Questions & Answers
I need a dish network code for my Insignia
Try the steps for a Power Scan below, this is easier than trying multiple codes.
- Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
- With the desired equipment on, press and hold the "AUX" button until
all mode button backlights illuminate (about 3 seconds), then release.
- For AUX mode Power Scan ONLY: press 0 for a TV, press 1 for a VCR/DVD,
press 2 for any other device, then press *.
- Press and release the Power button.
- Press the Up button once a second while pointing the remote at the desired
equipment. If the code for the equipment comes up, the equipment will power off.
- Press the POUND (#) button. If the code entered is valid for the remote, the
mode light flashes three times.
To verify the code works try several different functions
for that equipment.
DISH Network Customer Service
on Feb 10, 2011
The Insignia NS-WBRDVD blu ray player will not
This is a common problem. If you go to the Insignia web site and find the forums, you will see a 40 page list of wireless connection problems. The wireless section of this player is junk. Use the wired connection and save yourself a lot of aggravation.
on Nov 16, 2010
Will not play new movies. keeps rebooting to
If you are referring to "new" meaning recent releases, there was a change in the DRM and authoring scheme that was created by the releasing publishers. Several Blu-Ray players are having issues with this and solutions are being rolled out as quickly as possible.
The Insignia Blu-Ray players have solutions available as firmware updates on:
Search by your model number and download the latest firmware to a USB stick, insert into the player, follow the instructions, and you should be good to go. you should also receive updated applications like Netflix and Pandora.
Hope this helps.
on Jul 15, 2010
Getting netflix activation code insignia ns-brdvd2
Getting the netflix activation code requires you to log on to the netflix website, enter your code, and then your Blu-Ray player will stream Netflix.
You will need a Netflix account forthis to work...otherwise you will not be able to use the Netflix service.
on Jun 23, 2010
I continue to have to switch my HDMI cable between
My best bet would be a port issue - see if another device will work plugged into that port. (Some HDTVs have a HDMI port strictly for Service and nothing else but a Technicians specified cable will work in this port, look at the Manual) Check to see if your TV is set to the same port as your connecting to. One will be HDMI 1, next HDMI 2 and so on, the input button on remote should switch from port to port, make sure port setting on TV is same as #port your connected to.
on Jun 18, 2010
Not finding what you are looking for?