20 Most Recent Toshiba TEC B-452 Thermal Label Printer - Page 2 Questions & Answers

This is a problem with windows error 482 is probably a problem with activeX

From looking around I assume the Printkop is the Printhead? If so they appear to be available in several places online including here.Good luck.

You can get the manual on the link below.

http://toshibaprinters.com/technical_information/owners_manuals/b452om.pdf

Good Luck please rate 4 thumbs up and please leave a testimonial

Check the size of the label in your codes or driver.
The length must be correct or else you cannot use it correctly.
You must may be recallibrate the sensors

If the film is old, the "ink" dries up and won't stick to the paper, causing the characters to be broken up. Try buying a fresh ribbon and see if the problem goes away.

First of all, With any Toshiba label printer, after a parameter reset, you must send a label before doing a feed. Otherwise the printer will try to feed the ribbon. You can use the setting tool to tell set the printer to direct thermal also. Easiest way is to use the windows driver , add a label format coresponding to the one you are using, verify in the support tab that you are in direct thermal, do a test test print from the driver and you'll solve your problem

Perform hard reset of electronics and also re install the driver.

You can download the drivers at any toshiba official site ..

chage the value in the temperature adjustment or directly on the printer in the adjusment menu, or use the seagull driver

Have a probelm with my linux cups driver under ubuntu 14 a work through is to ativate the zmode and use the zebra driver.

Check the size (length of the label and check the type of detection. - check if there is a feed adjust value in the printer ajustments menu and in the driver. to return to zero checkbox the advanced parameter and print a label to send zero values.

The printer knows nothing at all about labels, and isn't looking for any gap. I think you specified the wrong settings in whatever software you're printing the labels from - something in "Page layout" or "Format" or possibly "Printer Settings". You need to tell the computer software exactly what labels you're using, or exactly what your label specifications are.