Top 20 Kyocera TASKalfa 180 Copier Questions & Answers

fuser related =clear jam if any. =reset error clear - 1-0-8-7-1-0-8-7 -- 163---ok =replace fuser if damaged

Broken fuser heater wire

Fuser unit 1. Check that no paper jam is present.

2. Confirm that the wiring connector is

firmly connected and, if necessary,

connect the connector all the way in.

Fuser unit and Engine PWB (YC26)

3. If the wiring is disconnected, shorted or

grounded, replace the wiring.

4. Replace the Fuser unit and execute

U167 counter clear (see page 1-3-90).

(Deteriorated sensitivity due to the toner

adhered to the center thermistor.) replace the fuser repls

my dear you chek heater unet problem

dirty optics(scanner unit) clean the mirrors and lamp in the scanner area

try taking out the cassette and cleaning the pick up feed rollers with isopropyl alcohol. jam 21 is no paper pick up from cassette. if this does not work my need new feed rollers or feed clutch

please you should initializing set uo

details????

Good day, if your error is toner then make sure the small white gears on the back of the toner cartridge is turning, if they are not then replace toner bottle, if they are turning ask a technician to test the toner motor. If your machine displays error C6400 then enter service mode by pressing 10871087, now press 163 and OK, now restart your machine, if the code is still there then you should replace your fuser/fixing unit.

to reset to factory default I believe its u002 in service mode to enter service from copy screen or possibly the job status screen cant remember hit 10871087

replace fuser. reset error in service mode

its turned off

my dear your corna wire broken

enter '1087' '1087' using the numeric keys press the start key enter '251' use the zoom key to select 'CLR' then press start key Enter "001" using the zoom +/- keys or numeric keys and press the start key. to exited key

polygon motor be in laser block

Reset Procedure: Enter 1087-1087 (1087 twice) from the keypad. Enter 163 by using keypad. Press "Start" (the green button) twice. The machine will restart automatically.

my dear your heater problem

You need to either change the toner on your copier or change the settings so it makes it darker.

10871087

I know. Try opening the cover and closing it.

enter job accnt