Top 20 Kodak Esp 3250 Allinone Multifunction ( C InkJet Printer Questions & Answers

If everything is ok and printer is not printing it needs to be checked manually now. If you wish you can contact me at +1631-855-3940 or through IMO app +918510879267

Reboot your computer as well as your scanner, also check your data cable if properly connected as well as the power cord of your scanner, else try to uninstall your printer/scanner and reinstall it again. Reboot again and try connecting again. Usually, it is not possible to use your scanner simultaneously while printing.

Go to printer diagnostics, check ink levels, try a deep cleaning. Make sure printer is online in the printer control panel. If this is a new printer for you, download the drivers from the manufacturers website.

Hello, Please follow this link to help you trouble-shoot this issue! Printhead and ink cartridges don move to center with access door open Good Luck! Rich Lilja

They Are Known For Print Head Problems--If You Have Home Center Installed, Call Service Number--If You Can Get Someone You Can Understand, They Can Check Your Problem By You Allowing Them To Use Home Center.

press cancel button and exit paper sport pull if show.other wise return back pull

I have a Kodak 9200 that did the same thing,it parked the printer head and cartridges to the left under the one place you do not have access to,I always try to fix something that is already broke,I could not get the printer head out so I unplugged the printer and I cut off the plastic cover with a heavy pair of tin snips,then I removed the ink cartridges then I pushed the ink pad at the bottem back,this released the printer head,then I took Q-tips and cleaned the area below and around this area ,I removed an unbelieveable amount of thick sticky ink,clean the sides where the ink pad goes in and out,they stick because of the gummy ink and once clean it should work for a long time,I would recommend this printer if they made this part accessable,once you close the lid the cut out cannot be seen.

your print head needs to be replaced

Sorry this is a system failure error . this sometimes can be resolved with a new printhead. otherwise contact kodak for a replacement.

website kodak .com look for aio software

Time to change the printhead you can get this from kodak about $25

no it doesn't

yes of course

the kodak system uses a countdown system that assumes you use a certain amount of ink re sheet regegardless of how much ink you accutualy use, the counter system starts everyt ime you turn the printer on, so the only way to extend the life of the ink is not to turn the printer off netween use, which the domestic useres do not of course do what i did throw the printer away and get a new one not Kodak sh*t

Replace the cartridges.

Clean the printer heads with alcohol on a Qtip

Faults like this would typically be down to a partially blocked/dried printhead and easily resolved with cleans. If however repeated cleans have not improved the situation I would recommend contacting Kodak directly. They should be able to help you to determine whether is is genuinely a dry ink issue or if it is a mechanical problem with the printhead (that are pretty common with this range).

You can download the printer driver from This WEB site.http://www.siliconguide.com/drivers/device/1764/

have you checked your ink levels? even when you buy it new sometimes the ink can be dried out.

I have replaced the color and black cartridge . I have cleaned it and it is still streaky printing. What do I do?