Top 20
Kodak ESP5250 All-In-One InkJet Printer Questions & Answers
My Kodak all in one printer won't respond to
This used to happen all the time when I had one. The best thing to do is to completely uninstall the printer and all it's added programs from your computer.
Switch off the computer and let cool down (have a cup of coffee) Now reboot the computer and then reinstall the printer and follow instructions to connect via Wi Fi
If this works make sure auto update is switched OFF as every time mine was updated your problem occurred. So much for Degreed wonders who try to justify their existence and completely mess up a perfectly sound working system when they don't know what they are doing, shame they never seem to have a brain or any logic.
Faded print
using the D-pad on your printer, scroll down the menu until you get to "maintenance"
Press OK
Scroll down to "clean printhead"
press OK
The printer will now make some noises and after about 30 seconds will say complete.
Now scroll down once more to "Print test page"
press OK
load paper and press the start button
Iff the printed page looks ok...job done. If still faint, repeat the above steps once more.
Not printing
Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles. If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later model and better printer than replace the print head.
Error Code 105-100003
1 Wireless connection
- Turn off the printer.
- Wait one minute, then turn it back on.
2 USB or Ethernet cable
- Turn off the printer.
- Check the connections.
- Turn on the printer.
- Make sure that the print queue is online.
afor more help visit
CBR Tech Solutions
ESP 5250
Reload the software, if it still won't print replace the printer. The cost of All In Ones is so low that the repair cost will exceeed the cost of the replacement. I go my new Canon free with a rebate.
5250 updates
You need to install the drivers on you new computer. Here is links I came across to allow you to download the proper driver for Windows 7. First one should work fine but just in case I included a second link. If you have any trouble, just ask.Link 1:
Click HereLink 2:
Click Here
Cannot clear error code 3523
Had the same problem error 3523 that would not clear. Tried Kodak support with no results so took matters into my own hands.Noticed the top tray seemed jammed into the printer. Tried pulling it out but it seemed locked. Flipped the printer over, removed 8 screws, 4 metal plates. Removed bottom tray, set aside. Remove 3 screws for plastic bracket that holds top tray. Move bracket over, be careful not to damage wires. Remove top tray and reinstall so that it is in extended position. There is two notched in the side of the top tray. Extend so that catch is in back notch.Reassemble everything in reverse order. Take care that the top tray does not slide into the printer when you turn the printer over. It did for me the first time that the tray jammed again.Replug everything and startup the printer with top tray extended past bottom tray. The printer will tell you that top tray is jammed, push top tray flush with bottom tray.Printer now works. Don't know why tray jams in the first place but this solution can keep you from scrapping printer or paying for service.Very disappointed with Kodak printer. Obviously printers were not their core business and they paid a sub-contractor to build these products for them. My next printer will be an HP.
8200 The UI file is missing what does this
I have lost connection to my printer from my laptop. It says 8200 ui file is missing. I have a laptop that I just bought in December, and the printer was purchased in February. Can someone please tell me what has happened, and what I can do to resolve this situation.I have already tried to uninstall the printer and reinstall it, but no success.
Is it possible to clean the print heads on a
Hi there.
You can clean it by doing the following:
- Press Home on the printer control panel.
- Press the down arrow button until Maintenance is selected, then press OK.
- Press the down arrow until Clean Printhead is selected, then press OK.
Let me know if you need further assistance.
Thank you!
Keeps coming up with paper jamb but no paper jamed
possibly the sheet detector sensor or a feed roller is bent out of true. Inspect the paper path and see if there are any rollers that are not lying flat, or may have slipped out of their retainers (possibly caused by a paper jam you had before). With a small paintbrush, try to clean the paper pathway area and look for any small spring loaded rollers that may have popped out
Not finding what you are looking for?