20 Most Recent
Cisco WAP4410N (WAP4410NLA) Pre80211n Wireless Access Point - Page 8 Questions & Answers
Garbled voice when using vpn phone
This is usually a latency issue. Monitor your network and see what is killing the bandwith on the vlan your phone is on. It's tough to answer this without more information as the problem could be on your local physical network or somewhere outside of the demarc. It is wise to keep your voice network separated from your data network in order to optimize bandwidth for the phones.
Ps3 linksys wifi restriction
I'm guessing this has something to do with "NAT" being restricted. It's complicated, and you'll have to open up some ports to your PS/3's LAN IP address. I suggest you search a bit on google and find one with photos that you can follow step by step.
Open process token norton
This may be a problem from something other than the router. The site may be rejecting your device that you're using. Try using a different device and get back with me if you still encounter problems. Thanks and god bless.
My cisco/linksys router is having a lot of
I suggest using the provided utility on the disk to fix your problems. Otherwise, get on a wired device that is on this particular network, get on a browser, and type http://192.168.1.1/ . This will ask for credentials, which you can find within the provided documentation. Find the tab at the top labled 'Wireless' and, as I would recommend, turn off all connections besides one primary 2.4Ghz connection. Also, double check that you're entering the password correctly. As simple as it sounds, an invalid password can lead to several authentication problems.
I want to reset my router because I forget the pasword
CISCO/Linksys -Toreset the Linksys back to the default settings -Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.Connect a LAN cable from the Linksys to the LAN port on your computer.Open a browser and enter the Linksys configuration URLhttp://192.168.1.1The default login = adminThe default PW = adminYou can protect your router by changing the default admin PW (write it down andput it in a safe place)Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Now apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Get password
to get into setting of the router open your web browser and in the address bar type 192.168.1.1 you will be asked for user and password. type admin for both. you will then be able to navigate through the settings to find your password and also you can change it if you want.
Not finding what you are looking for?