20 Most Recent
Kyocera Mita FS 3800 Laser Printer - Page 5 Questions & Answers
What does code c-6 indicate?
Press and hold the following buttons in the sequence below.
(1) Stop/clear, (2) start, (3) exposure lighter, (4) exposure darker, release the 4 buttons and press the stop/clear button again. the display should now indicate 000.
below the display are 3 buttons... press the left button once, the middle button 6 times, and the button on the right 3 times. the display should now indicate 163.... press the start button 3 times.
your machine will now restart, and if the code was as a result of a power problem, should now work fine. if not the problem could be related to the fixing unit, power supply, or one of the boards.
Also do not tamper with any settings while in the service mode, this WILL have undesired effects. TAKE NOTE, this will only work if your model is the KM-1500
How can I reset c-6 code?
press and hold the following buttons in the sequence below.
(1) Stop/clear, (2) start, (3) exposure lighter, (4) exposure darker, release the 4 buttons and press the stop/clear button again. the display should now indicate 000.
below the display are 3 buttons... press the left button once, the middle button 6 times, and the button on the right 3 times. the display should now indicate 163.... press the start button 3 times.
your machine will now restart, and if the code was as a result of a power problem, should now work fine. if not the problem could be related to the fixing unit, power supply, or one of the boards.
Also do not tamper with any settings while in the service mode, this WILL have undesired effects. TAKE NOTE, this will only work if your model is the KM-1500
Kyocera mita 6030
The optimizing performace may be because of the temperature in the room.Clean out all filters in the machine.Do not reset the drum light unless you do change the drum as the copy quality may degrade.
HOW DO YOU CLEAR ERROR CODE C5300 IN A KYOCERA 5050 MACHINE
You can try resetting the fuser error code by performing the procedure below:
On the copier type - 10871087 (may have to be in the job status menu first)
Once in MA mode type in - 163
Start
Execute
Start
You should then either cycle the power or the machine will cycle for you.
If this does not work you will need a new cleaning lamp for your fusing unit.
Kyocera 250ci making grinding noise
First you have to check the counters to see how many pages were printed or copyed. It may be a problem with some of the color drum units. At this model you need to change the units near to 100.000 A4 prints with 5% coverage. If the coverage is greater, then you'll need to change them sooner. There might be another cause for the sound, like the Transfer Belt Unit. This unit has a "waste toner path" that might be jamed. The unit is not able to get rid of this waste toner and some gears produce that noise. The transfer belt unit is working separatly for black prints and color print. You will have to remove the Transfer Belt Unit and clean the toner path with a vaccum cleaner.
Not finding what you are looking for?