20 Most Recent
Kyocera Mita FS 1900 Laser Printer - Page 9 Questions & Answers
3530 manual
Please can you be more specific as I am unable to understand the problem that you are experiencing. If the copies have background but the prints are ok then try adjusting the exposure settings on the display panel
Black lines on copy only when printing but copying
If this only occurs when using the document feeder then you will need to clean the smaller glass that sits next to the large glass that you manualy place your documents. The document feeder scans the originals over the small glass and any ink ,whiteout that may be on the glass will appear as lines down the pages
C710 error
Please can you tell me the model number?
Keys not responding
Not knowing the model number makes this difficult to answer.try pressing every button.If one button is stuck down then it will lock up the keypad.If the machine has a touchscreen then run a business card between the screen and the surrounding cover as a stuck piece of grit or sugar can cause this problem.
Km2050 c0210
Main board and engine board not communicating.Try switching off at the wall for 30 minutes.
C 6020 persistant
This would indicate that your fuser unit (hot part) has failed.You have not mentioned the model so unfortunately I can not offer any more assistance...sorry
How to repair j40 problem in km-1500
J40 means that you have a paper jam located in the fuser unit of the machine (the hot part)You will need to locate and remove the jammed paper.Faulty fuser sensor.This may need to be looked at by a technician.
Kyocera 5050
Please can you provide more information on the quality issue.too light,too dark?
C3200 error
if it is MFP then try cleaning copy lamp if problem not solved replace it. There is a chance of scanning cable defective.
Not finding what you are looking for?