20 Most Recent Kyocera Mita FS-3830N Laser Printer Questions & Answers

you have a bad developer unit I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Have you tried a blank password?

time to install maint kit.

facing prnter look on left side. midway of side panal theres a door. push tab on door to the rear of printer a bit and door should open. depress plastic tab on neck of toner coleection bottle and pull out full bottle. replace or empty an dreinstall and cloe door. should reset and restart to ready condition.

you need to switch your print driver from pcl xl to pcl then this error should go away... when you open up printer driver properties... you get to this option by choosing the option the tab the furthest to the right... I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Go to kyocera's website to download, ckick this link and it will take you to the driver you need.

OS 9

OS 10.2 and 10.3

OS 10.4 and 10.5

List of other drivers for this model printer.

Try to reset the printer.
Factory reset on Kyocera FS-3800 printer:
Connect the printer via paralell and type the following in at the command prompt:
ECHO !R! FRPO INIT; EXIT;