20 Most Recent Kyocera Mita KM-1650 All-In-One Printer - Page 3 Questions & Answers

reinstall the printer software on all the computers again .... may be it works

u need a software called scanner utility to be able to scan to a folder on the pc u connected to.Unless u scanning to e mail then ur new server has different network details

if ti is connected to the router directly ..you have to reset and set again the connection ..cause it is a completely other router ..and the default gateway and the ip address will be another ..by the Ip address of the new router ...If you set it to get an ip address automatically ..you just have to reset the connection ..or to set it manually ..according with the position of the printer /scanner on the router ..
if it is wireless connected..just see that it is connected and if you have a password on the network ..you will need to scan again for the network ..insert the password and connect it ..
My advice is to connect it directly to one of the computers (best the admin on e..the one used to set the router ) ..and after that go to scaners and faxes..and put it to be shared in the network ...
when you will need to print from other computer ..all you have to do is to go to printers and scanners..and add a new scanner..and search in the network..when you find it by name ..add it and that's all .from that computer will always send the jobs to that printer ..

c3200 is related to the optics. in km1650 the scanner may be derailed. check and realign the wire. clean the lamp and the entire optics.

Try turning off the ECM mode when sending to that number. The instructions are in the Fax user manual. If you dont have it go to www.gfbm.net and yo can get a link to Kyocera manuals.

A cover open state is detected during copying or printing .... please switch off the printer and switch on the printer and check it .......

remove the cassette and set the paper cursor to A4 and check ..........

Question edited for a lot more clarity!! Question moved to make model category. No you have to fix it. You need a service call.

KM-3050 KM-4050 KM-5050

moroinformatica.it http://www.moroinformatica.it > docs > KYOCE PDF Apr 1, 2013 - KM-4050. KM-5050 ... (4) How to tell a genuine Kyocera Mita toner container ... F14F. Power source PWB secondary side error. Defective power. 455 pages

reset fuser error in service mode ,simulation 163,

Adjust the finisher to the upper limits to resolve. The height from the factory is too low. Paper curl from moist paper will cause this jam code 6301.

Question edited to better English and spelling. Question moved to Kyocera MITA. https://www.google.com/search?q=Kyocera+Mita%2C+replaced+toner+but+still+says+replace+toner ..

https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=1#manual https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=10#manual https://www.manualslib.com/manual/359935/Kyocera-Km-2530.html?page=11#manual

You have not mentioned the modelThis error code means that the dim is at fault or requires re-seating into the machine.