20 Most Recent Kyocera Mita KM-1650 All-In-One Printer - Page 6 Questions & Answers

If you go to kmaconnect and read, there is a fix for that problem.

The cleaning lamp (which is in the drum unit) is defective. Replace the drum unit.

First you have to check the counters to see how many pages were printed or copyed. It may be a problem with some of the color drum units. At this model you need to change the units near to 100.000 A4 prints with 5% coverage. If the coverage is greater, then you'll need to change them sooner. There might be another cause for the sound, like the Transfer Belt Unit. This unit has a "waste toner path" that might be jamed. The unit is not able to get rid of this waste toner and some gears produce that noise. The transfer belt unit is working separatly for black prints and color print. You will have to remove the Transfer Belt Unit and clean the toner path with a vaccum cleaner.

You will need to replace the cleaning lamp for the drum unit or replace the engine board

Defective Charging Unit .. Cause of black copies.

press10871087 after press 163 reast

press 10871087 after selct 130

my dear you see dim ram and clean

Hi Not being an engineer, I can't be specific about your problem, but you can get a full service manual for your machine relatively cheaply here: Kyocera Mita KM2560 Service manual Parts Repair manual download A description of the contents is given on this page and I also give it below: "Service manual in English: maintenance, repair, troubleshooting, error codes, service mode, adjustment Parts catalog: parts list, parts numbers, exploded diagrams Service bulletin: Supplement manual, updates Firmware" Hope this is helpful, if so would you please register that with Fixya Cheers

This problem can be caused by many reasons :- 1) Drum unit malfunctioning. 2) Developer unit malfunctioning. 3) Drum unit not getting proper electrical contacts located on the backside of the machine.

try to reinstall the printer driver

Use a little water on grab rollers to see if that helps. If it does use a scrubby to roughen same. This is if the grab or feed rollers have become polished from use and lost the gripping surface. If the issue is after the feed rollers a motor or belt may be the problem inside and after the first feed roller.

Hi Please see the FTP site for Kyocera Printer & Copiers (Service Manuals/Part List/Firmwares/ Training topics/etc ftp://ftp.kdhk.hk Login name: DCTC10045 Password : dealer1087

Check the scanning lamp, when copying see if the scanning is not working,,it should be turn on when copying, if yes, then replace the scanning lamp, or drum unit, drum unit have certain life span or copying yield about 100 to 300 thousand copies produces. Check your counter reader in your machine. If yes, then replace drum unit, hope it help.....

Hi Check all the paper movement from the tray, left or right cover, front cover, if so then remove jammed paper. Otherwise the paper sensor spring guide missing or fell off from its original position. Check carefully where the sensor locate. paper sensors detect all the paper movement in the machine during copying or printing, so locate the place in the machine which the paper usually jammed, see the screen of the machine, it will locate the place where the paper jammed mostly. Sensor not return to it original position that is why ( remove paper jam keeps blinking)

If the copier won't boot, you probably have corrupt main firmware or an issue with the dimms or hdd. It sounds as though you are probably are not a Kyocera tech. You're probably gonna need a tech to figure this one out for you.

check the waste toner tank

adding toner