20 Most Recent Kyocera Mita KM-5035 Printer - Page 2 Questions & Answers

Take to dealer..

press 1087 1087 reset 20

This is a fuser problem , and with any luck you will be able to reset it. Do this: in the copier mode press yellow reset button, then press 10871087 in rapid prosession. Scroll to u 163 ( fuser reset,) and press start button to enter mode . Press execute and wait till mc asks for a restart. Swich the main power of, wait a few seconds and restart. If this does not work you will need to contact your service agent

This code indicates that the fuser unit has failed.Please consult with your local dealer.

Indicates that you may not have the cable from the back of the document feeder plugged in correctly.Please ensure that you have turned the copier off before you unplug and re plug in this connector

Ensure that you are using the correct driver,Ensure that you have set auto configure in the driver device settings or tick the relevant box's.

Image formation unit.Has the drum been removed from this machine.Its either missing or requires replacing

Default is admin admin.

What error code?

i have kyocera mita this machine toch screen is working but numbers manual is not working please give me solution immediately

This is an error is indicating a connection error when using the send feature.

Below I have provided some information or for more information download the users guide from the manufatcures website using this link. http://usa.kyoceramita.com/americas/jsp/Kyocera/resource_details.jsp?pid=16088&rid=16313

2101, 2102, 2103, 2201, 2202, 2203, 3101:

The network cable is disconnected or the hub that it is connected to is not operating properly. Check the cable and the hub. Otherwise, the server name or the host name of the SMTP server is

not set correctly. Use COMMAND CENTER and register the SMTP server name and the host name

correctly.

2204: The E-mail size exceeds the acceptable send data capacity. Decrease the size or resolution of the scanned data to be transmitted and resend the E-mail. 5101, 5102, 5103, 5104, 7102, 720f:

Turn the main power switch off and back on. If this error occurs several times, make a note of the displayed error code and contact your service representative.(Refer to the corrective action for the error message " An error has occurred.")

9181: The scanned original exceeds the acceptable number of pages of 999. Send the ecess pages separately.

Hope this is helpful,

Shawn