20 Most Recent Kyocera Mita KM-5035 Printer - Page 7 Questions & Answers


First you have to check the counters to see how many pages were printed or copyed. It may be a problem with some of the color drum units. At this model you need to change the units near to 100.000 A4 prints with 5% coverage. If the coverage is greater, then you'll need to change them sooner. There might be another cause for the sound, like the Transfer Belt Unit. This unit has a "waste toner path" that might be jamed. The unit is not able to get rid of this waste toner and some gears produce that noise. The transfer belt unit is working separatly for black prints and color print. You will have to remove the Transfer Belt Unit and clean the toner path with a vaccum cleaner.

Kyocera Mita... | Answered on Jan 21, 2015


You will need to replace the cleaning lamp for the drum unit or replace the engine board

Kyocera Mita... | Answered on Jan 19, 2015


Defective Charging Unit .. Cause of black copies.

Kyocera Mita... | Answered on Jan 06, 2015


press10871087 after press 163 reast

Kyocera Mita... | Answered on Dec 24, 2014


press 10871087 after selct 130

Kyocera Mita... | Answered on Dec 24, 2014


my dear you see dim ram and clean

Kyocera Mita... | Answered on Dec 24, 2014


Hi
Not being an engineer, I can't be specific about your problem, but you can get a full service manual for your machine relatively cheaply here:
Kyocera Mita KM2560 Service manual Parts Repair manual download
A description of the contents is given on this page and I also give it below:
"Service manual in English: maintenance, repair, troubleshooting, error codes, service mode, adjustment
Parts catalog: parts list, parts numbers, exploded diagrams
Service bulletin: Supplement manual, updates
Firmware"
Hope this is helpful, if so would you please register that with Fixya
Cheers

Kyocera Mita... | Answered on Nov 30, 2014


This problem can be caused by many reasons :-
1) Drum unit malfunctioning.
2) Developer unit malfunctioning.
3) Drum unit not getting proper electrical contacts located on the backside of the machine.

Kyocera Mita... | Answered on Nov 27, 2014


try to reinstall the printer driver

Kyocera Mita... | Answered on Nov 27, 2014


Use a little water on grab rollers to see if that helps. If it does use a scrubby to roughen same. This is if the grab or feed rollers have become polished from use and lost the gripping surface. If the issue is after the feed rollers a motor or belt may be the problem inside and after the first feed roller.

Kyocera Mita... | Answered on Sep 05, 2014


Hi

Please see the FTP site for Kyocera Printer & Copiers (Service Manuals/Part List/Firmwares/ Training topics/etc

ftp://ftp.kdhk.hk
Login name: DCTC10045
Password : dealer1087

Kyocera Mita... | Answered on Aug 28, 2014


Check the scanning lamp, when copying see if the scanning is not working,,it should be turn on when copying, if yes, then replace the scanning lamp, or drum unit, drum unit have certain life span or copying yield about 100 to 300 thousand copies produces. Check your counter reader in your machine. If yes, then replace drum unit, hope it help.....

Kyocera Mita... | Answered on Aug 28, 2014


Hi

Check all the paper movement from the tray, left or right cover, front cover, if so then remove jammed paper. Otherwise the paper sensor spring guide missing or fell off from its original position. Check carefully where the sensor locate. paper sensors detect all the paper movement in the machine during copying or printing, so locate the place in the machine which the paper usually jammed, see the screen of the machine, it will locate the place where the paper jammed mostly. Sensor not return to it original position that is why ( remove paper jam keeps blinking)

Kyocera Mita... | Answered on Aug 28, 2014


If the copier won't boot, you probably have corrupt main firmware or an issue with the dimms or hdd. It sounds as though you are probably are not a Kyocera tech. You're probably gonna need a tech to figure this one out for you.

Kyocera Mita... | Answered on Aug 24, 2014


check the waste toner tank

Kyocera Mita... | Answered on Aug 06, 2014


adding toner

Kyocera Mita... | Answered on Aug 03, 2014


user manual F functions

Kyocera Mita... | Answered on Aug 03, 2014


model of equipment please?

Kyocera Mita... | Answered on Aug 03, 2014

Not finding what you are looking for?
Kyocera Mita KM-5035 Printer Logo

115 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

AAAA262430

Level 2 Expert

51 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Kyocera Mita Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Mita Office Equipment & Supplies

  • Kyocera Mita Office Equipment & Supplies

Most Popular Question

replacing dc controller board

  • Office Equipment & Supplies
Loading...