Kyocera Mita KM-2050 Printer - Answered Questions & Fixed issues
Error code in 3045 km kyocera
Zero-cross signal error
While fuser heater ON/OFF control is
performed, the zero-cross signal is not
input within 3 s.
fuser related problem
12/11/2017 10:20:12 AM •
Kyocera Mita...
•
Answered
on Dec 11, 2017
•
137 views
Call for service c4000
Polygon motor synchronization problem
The polygon motor does not reach the
stable speed within 20 s of the START
signal turning on.
Poor contact in the
connector terminals.
Check the connection of connector YC3 on
the engine PWB and laser scanner unit, and
the continuity across the connector terminals.
Repair or replace if necessary.
Defective polygon
motor.
Replace the laser scanner unit.
Defective engine
PWB.
Replace the engine PWB and check for correct
operation.
12/11/2017 9:53:23 AM •
Kyocera Mita...
•
Answered
on Dec 11, 2017
•
174 views
Error code C6400
check your fuser unit thermistor or thermostat or lamp as the following digita 1087 1087 and put 163
9/8/2016 5:19:14 AM •
Kyocera Mita...
•
Answered
on Sep 08, 2016
•
972 views
KM-2050 / error c3100
C3100
Scanner
carriage problem
• The home position is not correct
when the power is turned on or copying
the document placed on the contact
glass.
Poor
contact of
the connector terminals.
Defective scanner
home position
switch.
Defective engine
PCB.
Defective scanner
motor.
7/12/2018 2:24:09 PM •
Kyocera Mita...
•
Answered
on Jul 12, 2018
•
5,556 views
Not finding what you are looking for?