20 Most Recent
Panasonic KXDT333 Phone - Page 8 Questions & Answers
Can the Panasonic KX-T7667 phone work with the Panasonic KX-TES824 PBX?
Yes, the Panasonic KX-T7667 phone and the Panasonic KX-TES824 PBX are compatible.
The KX-TES824 should be able to accommodate different handsets because it is made to work with a variety of Panasonic phones, including the KX-T7667 model.
You must connect the KX-T7667 phone to an available extension port on the PBX and configure it with the proper parameters using the PBX programming software or a web interface in order to add the phone to your current PBX system.
It's vital to keep in mind that the KX-T7667 is a proprietary phone made just for Panasonic PBX systems and might not work with other phone systems or third-party hardware.
How to save caller id with name in panasonic kx- at7730
To save caller ID with a name in Panasonic KX-AT7730, you need to follow these steps:
Press the "Program" button on the phone.
Dial "9" to enter the "Caller ID" setting.
Dial "1" to enter the "Caller ID Memory" setting.
Dial the memory location number (0-99) where you want to save the caller ID and name.
Enter the caller's phone number using the keypad.
Press the "#" button to move to the next field.
Enter the caller's name using the keypad (use the alphanumeric keys to enter letters).
Press the "#" button again to save the entry.
Repeat steps 4-8 for each caller ID you want to save.
Note: Caller ID service must be enabled on your phone line for this feature to work. Also, make sure you have enough memory locations available in your phone's memory to save new caller IDs.
Why OGM recording code *361 doesn't work in Panasonic KX-TDA100?
The issue with the *361 code not working on your Panasonic KX-TDA100 could be due to a few reasons:
- The code may not be enabled in the DISA feature settings. You can check the DISA feature settings to ensure that the code is enabled for OGM recording.
- The code may be conflicting with another code or feature on the system. Try using a different code for OGM recording, such as *38 or *391.
- There may be a hardware or software issue with the system. In this case, you may need to contact Panasonic technical support or a certified technician to diagnose and resolve the issue.
It's also worth noting that different Panasonic phone systems may have different codes and settings for OGM recording, so be sure to consult the user manual or technical documentation for your specific model.
Panasonic KX-TGA750C phone backlight is on, but LCD display does not come on. Cause?
If the backlight of your Panasonic KX-TGA750C phone is on, but the LCD display does not come on, the most likely cause is a faulty LCD screen. This could be due to damage from physical impact, moisture or water damage, or simply wear and tear over time.
One thing you can try is to reset the phone to its factory settings. To do this, remove the batteries from the phone and unplug the base station for a few minutes. Then, reinsert the batteries and plug in the base station again. This may reset the phone and fix any software or firmware issues that could be causing the problem.
If resetting the phone does not work, you may need to have the LCD screen replaced. This can be done by contacting Panasonic customer support or a professional electronics repair technician.
Says line is in use but that is not the case
Even if you have tried a power off reset, as in the posted link, it could be a timing thing to reset, sometimes a component has to discharge.
Following the links advice, try increasing amounts of time. What length is reasonable if it does not reset in minutes? Don't see that posted anywhere, maybe our, or overnight.
https://forums.att.com/conversations/att-phone-equipment/landline-busy-signal/5df025a2bad5f2f606944631
Why does only one of my Panasonic cordless phone display busy
That that handset has lost its "pairing/registration" with the base. Initially, try to pair it again with the base. Should that not be corrective, remove the battery of the handset. Allow it in the unpowered condition for a few hours. The idea is to reset the handset back to factory defaults. Thereafter, install the battery and re-charge. "Pair/register' with the base.
The intercom on my panasonic kx-T7730 won't turn off, how do I fix this?
La fa?on de d?sactiver l'intercom sur votre t?l?phone Panasonic d?pendra du mod?le exact que vous avez. Voici quelques ?tapes g?n?rales que vous pouvez suivre pour d?sactiver l'interphone :
- Appuyez sur le bouton "Menu" ou "Menu principal" sur votre t?l?phone.
- Utilisez les touches de navigation pour acc?der aux param?tres de l'intercom. Cela peut ?tre sous l'option "R?glages" ou "Intercom" selon le mod?le.
- Utilisez les touches de navigation pour s?lectionner l'option "D?sactiver" ou "Off" pour l'interphone.
- Appuyez sur le bouton "OK" ou "Entr?e" pour enregistrer les modifications.
- V?rifiez si l'intercom est d?sactiv? en essayant de passer un appel.
Il est important de noter que les ?tapes peuvent varier en fonction du mod?le de t?l?phone et de la version du firmware. Il est recommand? de
Panasonic KX-DT543 Phone - Message button calls a phone extension instead of the voicemail extension. How do I change it?
To change the behavior of the message button on a Panasonic KX-DT543 phone, you will need to access the programming menu and change the settings for that button.
- Press the 'Menu' button on the phone.
- Press the '#' button followed by the 'Admin' button.
- Enter the administrator password.
- Press the 'Menu' button again, then select 'System Programming'.
- Scroll through the options and select 'Button Assignment'.
- Find the button labeled 'Message' and select it.
- Change the extension number to the desired voicemail extension.
- Press the 'Save' button to confirm the changes.
I have a Panasonic phone..when I press the flash/call waiting button I get the second call but when I press it again to get the first call I lose the call
It sounds like you are experiencing a problem with your call waiting feature. When you press the call waiting button, you are able to switch between the two calls. If you press the call waiting button again to return to the original caller and the call is disconnected, there could be a problem with the call waiting feature on your phone.
There are a few things you can try to fix this problem:
- Check with your phone service provider to see if there are any known issues with the call waiting feature on your phone.
- Make sure that call waiting is turned on for your phone. This is usually done through the phone's settings menu.
- Try restarting your phone. This can sometimes resolve any issues with the phone's software.
- If the problem persists, you may need to have the phone inspected by a technician to determine the cause of the issue.
Not finding what you are looking for?