20 Most Recent
Whirlpool Gold Series GB2SHTXTS (219 cu ft) Refrigerator - Page 2 Questions & Answers
Whirlpool refrigerator is not getting cold but freezer is freezing. Can someone help, please?
As the freezer is working you can probably discount that the reason is low refrigerant gas. The other reasons would be that the fridge circulation fan has failed.
or
The channel that directs cold air from the freezer is blocked with ice at the rear of the freezer. It happened to my GE and was caused by a failed defrost timer that was icing up the evaporator coils at the back of the freezer.
A service call lasts about an hour including melting the ice with a heat gun..
10/3/2023 2:45:18 AM •
Whirlpool...
•
Answered
on Oct 03, 2023
Whirlpool refrigerator compressor
I would seriously NOT recommend doing this! Trying to run a 110 volt appliance at 220 volts is too much power for the electrics inside the refrigerator (or any 110v appliance) to cope with. You will 'Fry' the electrics possibly even risking causing a fire.
Do you have a model or serial number for this refrigerator? You might have to see if you can source one online and import it from the US. That could get expensive!
A simple and obvious answer here if the part is so difficult to get, is to buy a whole new refrigerator. Compare the cost of both options as it may be cheaper to replace the whole appliance.
9/3/2023 11:47:37 AM •
Whirlpool...
•
Answered
on Sep 03, 2023
Refrigerator not getting cold
There are several causes for a refrigerator that doesn't cool, including dirty condenser coils, poor ventilation, improper installation, faulty or dirty gasket seals, unorganized food storage, appliance location and malfunctioning internal parts.
8/25/2023 11:53:51 PM •
Whirlpool...
•
Answered
on Aug 25, 2023
Ice crusher has stopped crushing - Ikea/Whirlpool
The solenoid has nothing to do with the crusher mechanism. Rather it delivers water to the ice tray when empty. Check that the ice door closes completely after ice is dispensed otherwise frost can build up in the crusher blades and prevent them from moving into position. Otherwise, check for a worn out part that connects to the blades and would prevent them from articulating.
8/17/2023 6:13:43 PM •
Whirlpool...
•
Answered
on Aug 17, 2023
Jenn Air refrigerator not cooling enough
Based on the information provided, there are several possible causes for the Jenn Air refrigerator not cooling enough. One possible cause is a damaged or clogged condenser coil. The condenser coil is responsible for releasing heat from the refrigerator, and if it is damaged or clogged, it can cause the refrigerator to not cool properly. Another possible cause is a malfunctioning compressor. The compressor is responsible for compressing the refrigerant and circulating it through the refrigerator's cooling system. If the compressor is not working properly, it can cause the refrigerator to not cool enough. Additionally, a refrigerant leak can also cause a refrigerator to not cool properly.
It is also possible that pulling the fridge forward may have caused damage to the electrical wiring or components of the refrigerator, which could be causing it to trip the circuit multiple times per day. As for the ice maker, rust in the water supply line could indeed be causing clogs and preventing it from working properly.
To determine the exact cause of the issue, it is recommended to contact a professional appliance repair service to diagnose and fix the problem.
6/21/2023 7:58:41 PM •
Whirlpool...
•
Answered
on Jun 21, 2023
We have an Estate Whirlpool Side by Side Fridge
You have done some good work, and you are right on the money. Yes you need a new filter. There are o-rings that seal on each filter. These wear out but when you replace the filter you naturally get new o-rings and they seal better :) These seals used to be in the housing, but you can see the problem with that. Once those wear out, you have a much worse problem replacing those then with a filter. It's perfect really, you change the filter because you have too, and get a new seal at the same time!
6/20/2023 3:38:42 PM •
Whirlpool...
•
Answered
on Jun 20, 2023
Whirlpool side-by-side American style fridge-freezer and the bottom of the freezer is icing over
It sounds like you may have a problem with the defrost system in your Whirlpool side-by-side American style fridge-freezer. There are a few possible causes for this issue, including a faulty defrost timer, defrost thermostat, or defrost heater.
If the defrost timer is faulty, it may not be initiating the defrost cycle at the appropriate times, which can lead to excess ice buildup in the freezer. The defrost thermostat is responsible for regulating the temperature in the freezer and initiating the defrost cycle when necessary. If it is faulty, it may not be properly sensing the temperature in the freezer, leading to excess ice buildup.
The defrost heater is responsible for melting the ice buildup in the freezer during the defrost cycle. If it is faulty, it may not be able to properly melt the ice, leading to excess ice buildup.
To diagnose the issue, you may need to remove all of the back panels in the freezer to inspect the defrost system components. However, it may be best to call in an expert to avoid any further damage to your appliance. A professional technician can diagnose the issue and make any necessary repairs to get your fridge-freezer working properly again.
3/1/2023 12:19:20 PM •
Whirlpool...
•
Answered
on Mar 01, 2023
Not finding what you are looking for?