Top 20
Datamax M-Class Thermal Printer - Page 2 Questions & Answers
Trying to calibrate labels on E4205 and having
Hope you found a resolution to your issue by now, but if not, there was a firmware update meant to address calibration issues. You can also do an empty calibration where you remove the media and hold the feed button until the platen roller turns, then load the media and do the quick calibration where you press and hold the feed button. I have also found that moving the media sensor towards the center of the media sometimes helps. You can also try moving the media sensor, do the Empty Calibration, then the Quick Calibration, tehn move the sensor back and do both calibrations again.
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
How to identify a genx scanner device for Windows 7
When you have no driver for this Windows version and the former did not work, even in compatibility mode, then try the free program IrfanView. In the File menu first go to Select scanner source. VueScan is also a program supporting many scanners but not free.
MERA WORKCENTRE 5016 U2 ERROR CODE PROBLEM
Refer to pages 92 and 98 in the manual regarding error code. Switching it off and on may help (page 32). If such does not resolve the issue, you may have to consult your system administrator or the Xerox Welcome Center. 1 (800) 835-6100
My conlog is showing minus - 11.06 kwh
You mentioned a reading of minus 11.06 kWh. Here's what it means:
Remember that this is a prepaid meter, so the negative value suggests that you've used more energy than what was prepaid
The meter has consumed 11.06 kilowatt-hours (kWh) more energy than it has generated or received.
This negative value indicates that more energy was used than supplied during the specified period.
LED Indicator:
The meter has an LED light that flashes when electricity is consumed.
When you use electricity, the meter balance decreases, and the LED light provides a visual indication of energy flow.
Not finding what you are looking for?