Reebok 8000 ES Treadmill - Page 7 - Answered Questions & Fixed issues
Reebok edge 2.2 stuck on full speed
Ouch, well I am assuming it doesn't start the walking belt until the Start button is pressed, then speeds up to Max? Uncontrolled speed, or what manufacturers dislike, Runaway, is a sign of a failed (shorted) FET on the motor control board. Reebok is an Icon Brand and you might find a replacement or repair thru jatinah electronics who services all styles of controllers and has some exchanges available for as little as 75 and a returned core. Good luck!
How do you lube the deck belt
use a good silicon spray. it goes under the belt between the belt and walking deck. apply in a "s " pattern to cover entire area of walking belt.this keeps the friction down and squeaking noises
Reebok Treadmill error code 5
Exactly same just happened to my brand new Zr9 (error 5). Reebok said they would replace the motor or complete tredmill or my money back. Undecided as to what to do but thought i was buying a reliable bit of kit ??? They do cover it with 2yr warranty and it is really nice use, will research a bit more before deciding.
Shorting out
How long before it trips? Is it immediately? If so there is a short in the machine. You need onsite diagnosis. 877-805-1030
Fix led displays
Check to see if the RPM/speed sensor is functioning. On some models this sensor is positioned next to the pulley on the front roller and opens and closes each time the magnet on the front roller passes the sensor.
The sensor could have failed, or it may simply be too far away from the magnet on the front roller. 1/8 " is the normal distance between the sensor and magnet. It is also possible that the magnet is missing from the front roller.
Be sure to post the units exact model# which normally starts with RBTL....
Not finding what you are looking for?