20 Most Recent
Diamond Products 01738 Core Bore Weka DK12 Drill Motor - Page 3 Questions & Answers
How do I open a dustbuster cordless lithium modelHLVC320J01?
To open a Dustbuster cordless lithium model HLVC320J01, you will need to use a flathead screwdriver. Start by locating the screws on the underside of the device. Use the flathead screwdriver to loosen the screws and carefully remove the cover. Once the cover is off, you should be able to access the internal components of the device.
2/4/2023 6:34:55 AM •
Drills
•
Answered
on Feb 04, 2023
Drill master bad batteries or bad charger?
This could possibly be faulty batteries. Where are these batteries stored? If they are kept in a really cold place the batteries can 'cut out' and not charge until they have warmed up to room temperature. How old are these batterie and do they get used a lot? Batteries do get old and wear out. When both LED lights are on it is usually an issue with a shorted battery, (both lights on and NOT blinking), or a bad connection between the battery and the charger, (both lights on and blinking).
First unplug the charger and remove the battery. Take a close look at the connector pins on both to make sure there isn't dirt or something blocking the electrical contacts. Sometime the fix is that easy.
Next replace the charger. this is often your cheapest first step. That way you have a spare if the charger isn't the problem. If the new charger doesn't work it's the batteries that are faulty and they'll need replacing.
1/13/2023 7:31:48 AM •
Drills
•
Answered
on Jan 13, 2023
My Metabo charger ICS 10 turns off when I put battery for charging?
Hi,
Please check that your battery is oriented properly and that it's not past it's expiration date (usually found written on the battery). Also, the temperature of the room where the charging takes place should be within the range advised by the manufacturer. If the location is too hot or cold, then charging might not take place.
If all of these things are taken care of, but the problem persists, then you can setup a repair/replacement with Metabo by calling them at (610) 436-5900.
Thank you.
12/28/2022 2:52:37 AM •
Drills
•
Answered
on Dec 28, 2022
Mastercraft drill charger
The batteries have worn out for your drill and can no longer be charged anymore and you will need new batteries also. Or there might be something wrong with the charger as well.
11/21/2022 11:50:52 AM •
Drills
•
Answered
on Nov 21, 2022
I have a Hilti TE17 (some 40 years old), limited
You can use an AW46 Hydraulic oil. Do not put more than 35cc of oil in tool if you just poured out the old oil. You can put 50cc if you washed the housing out. Too much oil takes out the cushing of air between pistons. You will break the connecting rod or strip the gears. If you take the cap off of the top of the gear housing, older ones will be black. Newer ones had a red cap indicating that there was a clutch and see and it still looks wet with oil then I would not mess with it.
11/12/2022 3:59:16 PM •
Drills
•
Answered
on Nov 12, 2022
ION Block Party speaker won't work on battery
Hi,
depending on the age of your device, it might be time to switch the battery of the product if the current battery isn't strong enough to hold a charge. Thank you.
9/30/2022 1:27:50 AM •
Drills
•
Answered
on Sep 30, 2022
Not finding what you are looking for?