McCulloch FH140A Electric Pressure Washer - Answered Questions & Fixed issues
I had to take the
You can get parts diagram on-line on web site that will show you break down of parts that should help.
Nozzle clogged, can it be
Sometimes a high pressure air hose works. Sometimes but not always a paper clip can unclog them. I would try the air pressure first. Seems to work the best if your not going to replace them.
Mcculloch power washer fh140A 1400 PSI help
the unit will only **** up solution when the pressure is low, thats how they all work so you cant use pressure at the same time. You will notice that the pressure drops when using the solution ****..
soap 1st the pressure wash.
Mcculloch 280B gas blower has compression, fuel, ignition, won't start
Remove all fuel. Remove spark plug. Dry out the crankcase and cylinder by pulling the starter several times.
Reinstall spark plug. Remove air filter, hold throttle open and spray a short burst (~1sec) of starter fluid down throat of carburetor. Release throttle and promptly pull starter rope up to 5x.
If it fires and runs a few seconds then it is a fuel/carburetor problem.
If still no fire then more likely a spark or compression problem. Replace spark plug with new proper type and gap. Retry with starter fluid. If still no run then likely either a failed ignition module or poor compression/crankcase leak.
Not finding what you are looking for?