20 Most Recent Yamaha DTXplorer 5 Electronic Drum Set - Page 7 Questions & Answers

Amazon or ebay

Models differ, but when we had a similar issue, replacing the power cord did the trick. We almost didn't check it because the lights were coming on; there must have been enough power to light the lights but not play the sound ! hope that helps!

Google can be a miracle for finding manuals. Type in specifically what you need!

Request from Yamaha or Google

Go into edit mode... 1,) Look for "Touch Sensitivity" 2.) You will find that it's set to "0" 3.) Change it to either '1' '2' or '3' 4.) '1' for Classical Style, '2' for all styles, '3' for Rock and Roll 5.) After you've made a selection, the screen should start flashing "SAVE" 6.) Answer by pressing the "YES" button

https://reverb.com/news/diy-vintage-organ-repairs https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/1042036-yamaha-gx-1-alive-2.html https://www.gearslutz.com/board/electronic-music-instruments-and-electronic-music-production/812915-1978-electone-organ.html http://forum.pianoworld.com/ubbthreads.php/ubb/printthread/Board/6/main/188518/type/thread.html

Look on google,u can download it for free.

Water/ moisture damage corrosion of electronic connections or power supply cooked certain chips on motherboeard maybe melted after heating up to much

https://usa.yamaha.com/files/download/other_assets/5/319985/HTR-6230_manual.pdf https://www.google.com/search?safe=active&tbm=isch&q=Yamaha+htr+6230+dock+pinout+description+needed!&chips=q:yamaha+htr+6230+dock+pinout+description+needed,online_chips:yamaha+receiver&usg=AI4_-kRj8jVPbID1s1bHaxA5mENvGpjS7A&sa=X&ved=0ahUKEwjEidza07XfAhVFUxoKHY4RA8QQ4lYIKCgB&biw=1090&bih=544&dpr=1.25

https://www.yamahasynth.com/moxf-category/understanding-the-master-mode https://jp.yamaha.com/files/download/other_assets/6/330236/moxf6moxf8_en_rm_a0.pdf https://www.amazon.com/Yamaha-MOXF6-Music-Production-Workstation/dp/B00FFLT956 https://www.keyboardmag.com/gear/yamaha-moxf-reviewed

https://usa.yamaha.com/files/download/other_assets/4/324554/B40E.PDF https://jp.yamaha.com/files/download/other_assets/8/803278/els02_en_om_d0.pdf

Unless you are a tech, trained to repair this type of gear, I would strongly advise you to have it repaired by such a tech. Don't risk damaging the keyboard beyond repair. Spend the money.

either plug connection or headphones plug damaged or shorted

You can use the Line In jack, but you will probably need to use a mic preamp to raise the mic output sufficiently. You can try using an inexpensive mic from an amateur karaoke system or Guitar Hero etc. If that mic has no 1/8 inch mini phone plug, you can look for an adaptor, or have a tech type person set the mic cable up for you. If you want better quality, borrow or buy a professional vocal mic which uses an XLR cable and adapt the cable to plug into the 1/8 inch Line In jack on the keyboard. As I said, if the mic level is not loud enough, you can use a mic preamp, such as the ART Tube Mic Pre, which you can find used, or on a clear-out for maybe $25 to $35. Use a cable with a 1/4 inch connector on one end and a 1/8 inch connector on the other, to connect the mic pre output to the keyboard Line in. Plug the mic into the XLR input of the mic preamp. This will work 100%. Just adjust the mic preamp level controls carefully.

Yamaha has the user's guides available as PDFs for most of their instruments on their site: http://download.yamaha.com/top/?site=usa.yamaha.com&language=en . Enter PSR-6000 or select Pianos & Keyboards > Portable Keyboards > PSR-6000 and then press Select.

The link to the manual will display below the search area.

I hope this helps.

Cindy Wells

Is there a pattern to the wrong notes ( eg all up a semitone ? ) If so you could have altered the tuning. Try a master reset: Hold down top key whilst turning on. This will reset to factory setup. See attached for individual reset procedures:

It's Sitka Spruce.

That sounds like a problem with the contacts in the pedalboard or a short in the wiring harness. I'd suggest calling a tech in. You could cause a bigger problem if you aren't experienced.

Look for any drag of the key to the case or adjacent keys. Beyond that, the silicone rubber contact dome probably is damaged and needs replacing. Unit has to be opened and serviced. Parts are pprobably available from YamahaAmerica in CA.