Behringer XENYX 2442FX Mixer - Page 7 - Answered Questions & Fixed issues

Owner's manual has phone number for company to request a service manual.

Behringer Music | Answered on Jun 18, 2018 | 1,203 views

Call the store that sold you the amp if it is defective return it, you cab also call Behringers help line.

Behringer Music | Answered on Jun 16, 2018 | 65 views

did you feed the instruments thru a mixer?. This is a $25.00 item and is only repairable under warranty. Call whomever you bought this from

Behringer Music | Answered on Jun 15, 2018 | 42 views

Watch your impedance, when you add speakers the impedance will change. example 8 ohm speaker placed in parallel with another 8 ohm speaker the impedance is 4 ohms, placed in series the it is 16 ohm Me I would place in parallel this mixer should handle 3 ohms


Behringer Music | Answered on Jun 07, 2018 | 158 views

I found a Quick Start manual for the Behringer EuroLive B205D on the Behringer Download page: . Use the search boxes to select Loud Speaker systems and then find the B205D. The direct link to the guide in English is currently here: . A product information sheet is also available. I also found the quick start guide at Manuals Lib: .

I hope this helps.

Cindy Wells

Behringer Music | Answered on May 31, 2018 | 177 views

Order the service manual directly from Behringer.

Behringer Music | Answered on Apr 12, 2018 | 195 views

Behringer is a possible source.

Behringer Music | Answered on Mar 11, 2018 | 87 views

Output B amplifier has a problem. Most likely the output transistor.

Behringer Music | Answered on Feb 13, 2018 | 59 views

Try Googling (Behringer)(mx8000)(manual) without parens.

Behringer Music | Answered on Feb 11, 2018 | 556 views

Specify the full fuse ratings please. Internal fuses come in all shapes and sizes.

Behringer Music | Answered on Nov 06, 2017 | 39 views

Read the manuals for both the mixer and the active speakers. If you do not have the manuals, download them from the manufacturers websites. If you don't know hw to use equipment, don't buy it.

Behringer Music | Answered on Nov 06, 2017 | 27 views

Hi, the power light should not "blink" at any point. It should always be either on or off when either powered on or off. Sounds as though the internal toroidal transformer has gone faulty (common issue) and requires replacemnet by a professional.

Behringer Music | Answered on Nov 06, 2017 | 180 views

Clean the sockets and switches with a good contact cleaner.

Behringer Music | Answered on Oct 25, 2017 | 31 views

my peavy does that to me when I use a cheap extension cord,it has to be heavy duty cord,or plugged directly into receptical

Behringer Music | Answered on Oct 09, 2017 | 64 views

It sounds like a n overheating problem. Some component is running too hot and shutting down. This will not be a user servicable problem and it needs to go into the shop.
Discuss it with the shop when you take it in to be sure they will have access to the parts they need. Behringer is notoriously slow to ship parts so if it's an exclusively Behringer part as compared to a general electronic part you may have to consider replacing the unit depending on what time frame you have to work with.

Behringer Music | Answered on Jul 16, 2017 | 61 views

There has to be some internal problem for a fuse to blow. Putting in a bigger fuse can only cause more problems.

Behringer Music | Answered on May 12, 2017 | 67 views

Not finding what you are looking for?
Behringer XENYX 2442FX Mixer Logo

124 questions posted

Ask a Question

Usually answered in minutes!

Top Behringer Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers


Level 1 Expert

18 Answers

Ric Weide
Ric Weide

Level 1 Expert

10 Answers

Are you a Behringer Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides