20 Most Recent Dewalt Dw938 18v Reciprocating Saw Sawzall Recip 18 Xrp - Page 5 Questions & Answers

Similar model I hope: https://www.manualslib.com/manual/691988/Dewalt-7717.html

Does it have a serial number? Perhaps it only has a model number!

Have it trepaired under warranty. https://servicenet.dewalt.com/documents/English/Instruction%20Manual/N466020,DWS780.pdf

Are yopu sure you want to take saw aprt? DeWALT DW721 RADIAL ARM SAW Type 1

Dewalt DW708 Manuals

This part probably exceeds the price of a new saw https://www.partshopdirect.co.uk/dewalt-dw738-type-2-bandsaw-spare-parts-s6410

DeWALT DW738 BANDSAW Type 2 Wood Cutting DT8482 2095mm Bandsaw Blade spare... Buy Spare Parts for DeWalt DW738 BANDSAW DW738 Type 2 Powertool Spares Dewalt BS1310 DW738 DW739 DW3501 Bandsaw Blades

On the motorhouse or front of table but find it by google search on images , it can also differs on age and modifications by the motor if there was an motor modification that can happens there is no serial number to find anymore. google on search on IMAGES and fill in dewalt serialnumber miter saw look the possibilities.

Make sure the blade is the correct size. Check to see if the blade is on correctly and tight.

Choose your brand

The simple solution is to take notice of the both carbon brush wires to the electric field change both IF YOU shure know that the electric field is mounted in the right direction , if the wires to the carbon brushes are having enough length then your problem is solved.

DeWALT DW705 TYPE 8 12 Inch Miter Saw Parts Sounds like a bad switch, Since you don't have any money it go ahead a replce it. Good Luck

Item 61 https://www.fix.com/models/scroll-saw/dewalt/id773687/dw788-type%202/section6573527/page-b

Since your old motor died, it is a good opportunity to replace it with a single phase motor, provided the new motor is capable of the performance that you are needing. The new motor should have the proper motor mounts and be sized power wise for the application. What was the HP rating of the old motor?

Belt drive or direct drive? Sounds like a bad bearing. Some of the DeWalt products are total garbage (we had a brand new bench grinder that was junk from day one).

Your saw has an allen wrench bolt or a quick release pull tab on it. Put some oil on the bottom of the blade wait 5 minutes and then pull the tab or use the allen wrench and loosen it and hold the saw upwards and pull on the blade. you might have to wiggle it a little and the blade should come out.

Sounds like it's worn out, best take into the shop for repair, should only cost $20 with parts.

https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjO3rCm3L_YAhWKi7MKHXKhBHcYABABGgJxbg&ohost=www.google.com&cid=CAESEeD21pTPrqAmJtqI6_PQxHRY&sig=AOD64_2oizDkEo84QUDK2mK1e3BWaAJDkw&q=&ved=0ahUKEwi4paym3L_YAhXLkeAKHaeoBoAQ0QwIKw&adurl=