20 Most Recent
Kyocera FS2020D ECOSYS Monochrome Laser 35ppm USB20 Parallel Interfaces 500 Sheet p Printer - Page 3 Questions & Answers
I have kyocera taskalfa 400 take a lot of time to copy 50 sheet ( adding toner )
i replace a lot of kind off the toner
still the proplem
assuming the toner coverage per print isnt excessive , the problem could be any of the following,
toner - have you used 3rd party toner ( compatibles, remanufactured) - if yes - you could have put the developer toner ratio out of spec- fix by replacing developer tank AND toner.
if no - is there any blockage in the toner transfer pipe between toner cartridge and developer tank/ is the pipe split leaking toner if all looks ok , test the toner pump using the service commands., if toner is moving ok the problem must lie in the dev tank - the fix is still to replace the dev tank - good news is its plug and play comes with instructions on fitting and setting up .
I've refilled Kyocera FS- 1135 mfp then not
Kyocera compatible does not mean Kyocera genuine. Not using genuine toner can invalidate your warranty. If that doesn't bother you then the printer detecting a non-genuine cartridge is not an issue.
How do i remove error 4200-0099296
As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit
Cleaning waste box in toner
I don't recommend cleaning a waste toner bottle but if you do just pull it out and empty the toner out its very messy for don't wear anything you don't want to get dirty
Not finding what you are looking for?