Epson Perfection v600 - Answered Questions & Fixed issues
Unable to close cover of
The scanner's lid pulls upward a bit, and can sometimes get stuck that way -- in that case, the hinges won't bend. Try making sure the lid at the hinge end is flush against the bottom part of the scanner.
What happens if my scanner only scans half a page?
Hi,It could be that you are running out of memory. Try using a lower
quality scan setting to determine if that is the issue. (If more of the
document is scanned then Memory is likely your problem.) If not try
reloading the software.
Thanks for using fixya.....
I have this product primarily to scan 2 1/4 film.
I found some documentation on this product from Epson.
I don't know if this is what you where looking for, but here is the info i found:
Main users guide:
http://files.support.epson.com/htmldocs/prv6ph/prv6phug/index.htm
Placing films on slides info:
http://files.support.epson.com/htmldocs/prv6ph/prv6phug/set2_2.htm
Hope this helps!
Red flashing power light
I am sure the original poster will have probably replaced the unit by now but I just had a similar problem with my Epson Perfection 2480 Photo scanner so I think it is still worth posting the solution in case other people hit this problem in the future.
All I had to do was put the switch underneath the scanner to the "unlocked" position and then reboot the unit.
Hey presto it burst back into life.
It's annoying to see that the manual seems to suggest that the red light means the unit is "dead" !
Epson lq-690II printer reflects the paper when printing
Troubleshooting Paper Reversal in Printers:
*Confirm that options related to paper handling are set correctly by checking for specific buttons or switches that relate to paper handling or reversing.
*Ensure that paper is loaded properly to avoid feeding problems.
*Remove any dust, particles, or paper remnants from the rollers, as they can impede paper flow.
*If other measures fail, reset the printer to its initial settings to resolve potential software glitches.
4/2/2024 6:40:17 PM •
Epson Office...
•
Answered
on Apr 02, 2024
•
20 views
EPSON 15140 error 034019
Try a hard reset of the printer. Oddly, the 034019 is not an error code, I have reason to think. It is a contact number, I believe.
2/25/2024 3:05:22 AM •
Epson Office...
•
Answered
on Feb 25, 2024
•
29 views
Reset my Epson printer L382
Follow the steps given below to reset Epson L382 printer.
Step 1: Turn the printer off.
Step 2: Press and hold the reset button which is on the back of the printer using a paper clip or tip of a pen.
Step 3: Turn on the printer by holding the Power & reset button and continue to hold both the buttons.
Step 4: Wait for 5 seconds and a warning sheet will print. Release the reset button.
Step 5: After 5 seconds, another sheet will print which will show the IP address of the printer.
hold the reset button which is on the back of the printer using a paper clip or tip of a pen.
WHERE IS RESET BUTON? I CANT FIND IT.
1/30/2024 1:36:34 PM •
Epson Office...
•
Answered
on Jan 30, 2024
•
17,499 views
Not finding what you are looking for?