20 Most Recent Ricoh Aficio 2015 Copier - Page 3 Questions & Answers

Exposure lamp error.Verify the exposure lamp and the expo lamp thermistor.

replace thermistor &enter sp program &turn m/c off and on

you can try to reset the code by entering into service mode, just enter into service mode and then shut down the machine by the main switch and then turn it on after 30 seconds. For to enter into service mode press the following keys in the next order: press the yellow key ; then press 1-0-7 and then press the red key and hold it pressed until on the screen do not show service mode. If after this again the machine gives fusing error, it means that you have problem some part in the fusing unit. possible is the termistors or the teromstats

Yes, If you have installed a main motor from Aficio 1015 the machine will work and there will be no SC Code displayed, but the machine will print a reduced image. The part number for the main motor for Aficio 2015 is : " AX06 0270 Brushless Motor 24V/20W "

hello what type of error code do you receive?
SC XXX