20 Most Recent
Ricoh Aficio 2015 Copier - Page 9 Questions & Answers
ERROR SC 500
sc 500 is the main motor error. replace the main motor at the back. it will solve the problem.
Hallo how to add scanner to no of pc
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
When copier turn on and taking copies first 6
If the paper is not getting out of the tray, the rollers need cleaned.
The scratches. If the paper jams in the hot area. You will need a new hot roller.
Also the scratches may be coming from the drum. Sometimes it is hard to determine between the drum and fuser hot roll.
When copier is putting on , it displays " error
that is a fuser overheat code. You can try pressing clear all, then enter 107 and hold the stop button until you see the SP mode come on the machine, then as it is in that mode, shut the machine off and back on.
If that doesnt work. I would suggest replacing the fuser unit.
You would need thermistors, rolls, overheat thermostadts.
Individually they would cost more than replacing the fuser.
One dark line is coming on the copier
Does it only occur when you feed through the document feeder?
Not when you print of copy off the glass?
If it only does it then, clean the small strip of glass on the right side of the machine.
If it does it all the time then you need a new drum.
Hi my Ricoh aficio 2015
enter SP mode. 2xfunction clear(yellow button) 107 hold down Red clear button. 1 to enter copier, 7 to enter data log, 810 to reset key operator code. Exit , This shoud work. If not give me a shout.
My ricoh aficio 2015 showing
• The flat cable between the BICU
board and the SBU has a poor
connection
• The flat cable between the BICU
board and the SBU is damaged
• BICU board defective
• SBU defective
When copier is putting on
There is a bad thermistor in the fuser most likely.
You can try pressing Clear all then 107 and hold the stop button down.
That should put you into the SC area. Press copy sc then turn the machine off and on to see if it clears the fault.
Otherwise replace the thermistor.
Can't scan to gmail
the issue is not the copier business but with gmail. you need to use a different mail server.
Not finding what you are looking for?