Several possibilities. Here are steps to take. First, shake the toner cartridge of this laser printer. Distribution of the toner could be the problem. Secondly, the problem might be a dirty Corona wire. That charges the toner so it sticks to the paper. Clean it by turning off the printer and unplugging it. Open the front cover and take out the toner cartridge. Locate the green tab at the top of the drum. Slide it back and forth several times. Return the tab to its original position. Reinstall the toner cartridge and close the cover. Plug it back in and test it out. Lastly, the problem might be the drum unit. Sadly, the fix for that is to replace the drum unit. Oops, I forgot to mention to check the settings to see what quality of printing they are set to. Good luck.
hello,try the following method to resolve the issue
Inspect the printer for any components that show signs of wear or damage, including the print head, rollers, or guides they can result in problems with the printing process or any debris can significant affect
https://printcopy.info > brand=Ricoh > code=829
Code: 829 ; Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test. ; Causes: · Replace the optional ...
Does it take in paper and then jam there?
Open all the inspection doors. Remove paper trays. Remove all the toner cartridges. Use a flashlight and look for a small piece of torn paper and remove it carefully. Clean all feed rollers with a damp cloth. Reassemble and test.
https://www.google.com/search?q=Ricoh+MP+C5503+Paper+does+not+pass+front+of+fuser+unit
..
Here are some common issues and troubleshooting steps to help you identify and resolve the problem:
Wi-Fi Connection: Ensure that both your laptop and the Ricoh printer are connected to the same Wi-Fi network. If they are not on the same network, they won't be able to communicate with each other.
Printer Wi-Fi Setup: Make sure the Ricoh printer's wireless feature is enabled and set up correctly. Refer to the printer's user manual or support documentation for instructions on how to set up the Wi-Fi connection.
Network Firewall or Security Settings: Check your laptop's firewall and security settings. Sometimes, overly strict firewall settings can block communication between the laptop and the printer. Temporarily disable the firewall and check if the connection works. If it does, adjust the firewall settings to allow communication with the printer.
Printer Driver: Ensure that you have installed the correct printer driver for your Ricoh printer on your laptop. The driver is essential for establishing a proper connection and enabling communication between the laptop and the printer. Visit the Ricoh website to download and install the latest driver for your printer model and your laptop's operating system.
Printer Offline: Check the printer's status on your laptop to see if it is set to "offline." If it's offline, right-click on the printer in the "Devices and Printers" section of your laptop's Control Panel and select "Use Printer Online."
Wi-Fi Signal Strength: Verify that the Wi-Fi signal strength on both your laptop and the Ricoh printer is strong enough for proper communication. If the signal is weak, consider moving the printer or laptop closer to the Wi-Fi router or using a Wi-Fi extende
Here are some steps you can take to troubleshoot and potentially resolve the issue:
Power Cycle: Turn off the printer and unplug it from the power source. Wait for a minute or two, then plug it back in and turn it on. Sometimes, power cycling can clear temporary errors.
Check for Paper Jams: Ensure there are no paper jams or obstructions in the fusing unit or paper path that might be causing the error.
Allow Time to Cool: The "Service Call 551" error could occur if the fusing unit is overheating. In such cases, allow the printer to cool down for some time before attempting to use it again.
Reset Printer: Some printers have a "Clear" or "Stop" button that can be used to clear error codes. Press this button to reset the printer and see if the error clears.
Check Fusing Unit: Inspect the fusing unit for any signs of damage, such as burnt or worn-out components. If you notice any issues, the fusing unit might need to be replaced.
Verify Thermistor: The thermistor may be defective or dirty. Check the thermistor's connections and clean it if necessary. If the thermistor is faulty, it may need to be replaced.
Update Firmware (if applicable): Check if there are any firmware updates available for your Ricoh SP203SF printer. Updating the firmware may address known issues and improve the printer's performance.
Bizcopier.myhttps://bizcopier.my > Information
To enter service mode, press the yellow Clear button, then 1-0-7. Then hold down the red Stop button for about 5 seconds. The screen will shift to a menu.
To re-attach the output tray long piece on the Ricoh SP C360DNw, follow these steps:
1. Turn off the printer and unplug it from the power source.
2. Locate the output tray and the long piece that needs to be re-attached.
3. Align the long piece with the slot on the output tray and gently push it in until it clicks into place.
4. Turn on the printer and check if the error message has disappeared.
If the error message persists, try removing and re-installing the paper tray to ensure that it is properly seated. If this does not resolve the issue, there may be a problem with the sensor or other internal components of the printer, and it may require professional servicing.