Mitsubishi WS-65513 65" Rear Projection HDTV - Page 7 - Answered Questions & Fixed issues
Blinking green light of death
http://www.jyerdon.com/tv/
Did mine a couple of weeks ago and it fixed mine, good luck.
E-mail me with any questions if you get stuck or just need advice before you get started. I`m no tv repairman but am still fresh on how I did mine.
12/29/2008 11:45:23 PM •
Mitsubishi...
•
Answered
on Dec 29, 2008
•
87 views
Blinking Green light
There is a small hole on the front of the tv with a push button in it. Use a toothpick and push in the button until the green light goes out and this should reset your tv......Joe
12/21/2008 8:43:21 PM •
Mitsubishi...
•
Answered
on Dec 21, 2008
•
120 views
GREEN FLASHING LIGHT MITSUBISHI WS-65513
On the front of the tv there is a small hole with a push button in it. Take a toothpick and push the button until the light stops blinking. This should reset your tv.....Joe
12/21/2008 8:39:31 PM •
Mitsubishi...
•
Answered
on Dec 21, 2008
•
109 views
WS-65513
mike, give me an email address and I can send you a PDF!
4/19/2009 2:18:16 AM •
Mitsubishi...
•
Answered
on Apr 19, 2009
•
95 views
I have a mitsubishi ws65513
You need to change 4capacitors inside the dm module- if you have any electronics experience, this is an eazy/meduim job- if not, take it to a shop and have them change out the caps.
12/19/2008 2:41:42 AM •
Mitsubishi...
•
Answered
on Dec 19, 2008
•
99 views
Mitsubishi WS-65513
It seems that you have good power, so that shouldnt be the problem, You should go in and inspect for any swollen capacitors - they will look like the top is bulged outward..this sounds ALOT like a capacitor problem (rolling screen) - also if you have a problem with the inputs shutting off and giving a blue screen, you need to replace the 9v regulator on the main board right behind the signal board - it is a surface mounted BA09FP regulator... Let me know how this goes for you!
12/25/2008 8:50:07 PM •
Mitsubishi...
•
Answered
on Dec 25, 2008
•
277 views
Mitsubishi WS-65513 blinking light
After taking the back off look to the left side of the tv at the bottom and you will se a silver metal box with some small holes in it. The DM board is in this metal box. Good luck
1/3/2009 9:01:24 PM •
Mitsubishi...
•
Answered
on Jan 03, 2009
•
120 views
Cannot turn tv on
i have a fix for this DM board, if you want it please leave your e-mail addy and I will send it to you. This guide has pictures and tells you how to get to the board and what is the problem with it most of the time. good Luck
12/15/2010 6:18:53 AM •
Mitsubishi...
•
Answered
on Dec 15, 2010
•
452 views
I loose picture on my big screen
bad voltage regulator - BA09FP requires a bit of tech experience to replace, but its relatively easy. It took me about 1 hour to replace mine. If you need clarification on this, email me at Doin12volt at yahoo
10/9/2008 3:46:51 PM •
Mitsubishi...
•
Answered
on Oct 09, 2008
•
197 views
What else the blinking green light
Please research this more before asking a question! There are 4 caps in the DM module that need to be changed. It DOES require some technical skills and soldering experience. If you still have not found the answer to this problem, let me know
10/9/2008 3:42:19 PM •
Mitsubishi...
•
Answered
on Oct 09, 2008
•
54 views
Not finding what you are looking for?