20 Most Recent
Microsoft Windows XP Home Edition English for PC - Page 6 Questions & Answers
Primary Hard Disk Drive 1 not found
It means your hard drive has probably lost it's boot sector.What you can do is mount the drive as a slave drive in another system, if it locates it, because then it does not have to mount it as an operating sytem and boot, then you can copy your data from it so as not to lose it.After that, then try running a diagnostic utility to ensure the drive is not damaged. If it shows the drive as OK to use, then try reformatting it and reinstalling the OS. A complete reformat will then write the correct track zero information to make it bootable again.Usually however with that error depending on the size and type of drive it is toast and may or may not start a limited number of times to recover data to another drive. You might also find with some SATA drives - turning the machine off and reseating the connections or cables will cause it to work again as they sometimes partially work loose and then the drive is not mountable.
12/26/2011 10:49:56 PM •
Microsoft...
•
Answered
on Dec 26, 2011
How to reinstall audio drivers.
Hello sir, What is your system mother board cd modle.Then download the driver from internet.then run the setup file..................Enjoy,...........................
12/23/2011 2:43:34 PM •
Microsoft...
•
Answered
on Dec 23, 2011
While watching youtube browser jumps to mediaswitching.com
I would try downloading Firefox and see if the same thing happens. I assume you run regular virus checks, but it would be good to download Malwarebytes - a free malware removal program, and see if there is anything nefarious on your system that the normal anti-virus is missing. http://www.malwarebytes.org/
12/20/2011 7:42:01 PM •
Microsoft...
•
Answered
on Dec 20, 2011
I need to change my password on speedtouch dialup connection
To Manually change the dial up password in Windows 2000 or Windows XP
- Go to your Start, Programs or All Programs, Accessories, Communications,
Network and Dial-Up Connections
- Select your speed-touch connection
- Enter your new password exactly as it was given to you in the password
box
- Be sure the Save Password box is checked
- Click Dial to connect to speed-touch with your new password
- Your new password will be saved when you successfully connect to
speed-touch
- Be sure to save your new password in a secure location
12/12/2011 9:08:31 AM •
Microsoft...
•
Answered
on Dec 12, 2011
I need to change my password on my speedtouch dialup connection
To Manually change the dial up password in Windows 2000 or Windows XP
- Go to your Start, Programs or All Programs, Accessories, Communications,
Network and Dial-Up Connections
- Select your connection
- Enter your new password exactly as it was given to you in the password
box
- Be sure the Save Password box is checked
- Click Dial to connect to connection with your new password
- Your new password will be saved when you successfully connect to
connection
- Be sure to save your new password in a secure location
12/12/2011 9:06:51 AM •
Microsoft...
•
Answered
on Dec 12, 2011
Blue screen upon instal of xp
Are you installing it on laptop?? If it is, try check your BIOS settings on the SATA mode option if available.. usually it is either ACHI or IDE. try to change it and try to install your xp again.
11/30/2011 5:47:19 AM •
Microsoft...
•
Answered
on Nov 30, 2011
Need to restore
I would recommend just enabling the computer to enter standby after X minutes.To do this
- Click the start button
- Click Control Panel or Settings > Control Panel
- Power Options
- Enable standby after X minutes.
10/30/2011 12:53:35 PM •
Microsoft...
•
Answered
on Oct 30, 2011
Not finding what you are looking for?