20 Most Recent
Crosley Radio Pictograph Slide Negative Scanner 1 ea - Page 8 Questions & Answers
How do i get top off crosley washer
If I remember correctly a putty knife 2 inches from the side in front when pushed in the slot at the crevice should unlash the top from the body?
How do you get frount off washer
Take off the top, this exposes screws for the front plastic faceplate. Once that's off, it exposes screws for the front. There are another 3 or 4 screws at the floor. Note you'll need to prop front up (I used wood blocks) to get to the screws near the floor. Not enough clearance for even a screwdriver.
Washer over fills
Over filling us usually caused from loss of pressure in the water pressure hose. Check to see if it is pinched. The water pressure switch could also be bad. A rare thing could be a leaking or sticking water fill valve.
Not finding what you are looking for?